Project 5a: Distributed File Server




In this assignment, you will be developing a working distributed file server. We provide you with only the bare minimal UDP communication code; you have to build the rest.

A Basic File Server

Your file server is built as a stand-alone UDP-based server. It should wait for a message and then process the message as need be, replying to the given client.

Your file server will store all of its data in an on-disk file which will be referred to as the file system image . This image contains the on-disk representation of your data structures; you should use these system calls to access it: open(), read(), write(), lseek(), close(), fsync() .

To access the file server, you will be building a client library. The interface that the library supports is defined in mfs.h . The library should be called , and any programs that wish to access your file server will link with it and call its various routines.

On-Disk File System: A Log-Structured File System

Your on-disk file system structures should roughly follow that of the log-structured file system discussed in class. On-disk, the first structure should be a singular checkpoint region. The checkpoint region should contain a disk pointer to the current end of the log; it should also contain pointers to pieces of the inode map (assume there are a maximum of 4096 inodes; assume each piece of the inode map has 16 entries).

Other than the checkpoint region, your on-disk image just consists of an ever-growing log (i.e., we won't be implementing cleaning). Thus, whenever you write to the disk, you'll just write all file system updates to the end of the log, and then update the checkpoint region as need be. For example, if you are adding a new block to a file, you would write the data block, new version of the inode, and a new piece of the inode map to the end of the log; when this write completes, you should update the checkpoint region with the requisite new values.

The inode map is just an array, indexed by inode number. Each entry is a simple 4-byte integer, which is just the disk address of the location of the inode in question.

Each inode should be simple: a size field (the number of the last byte in the file), a type field (regular or directory), and 14 direct pointers; thus, the maximum file size is 14 times the 4KB block size, or 56 KB.

One other structure you'll have to manage on disk are directories. Each directory has an inode, and points to one or more data blocks that contain directory entries. Each directory entry should be simple, and consist of 32 bytes: a name and an inode number pair. The name should be a fixed-length field of size 28 bytes; the inode number is just an integer (4 bytes). When a directory is created, it should contain two entries: the name . , which refers to this new directory's inode number, and .. , which refers to the parent directory's inode number. For directory entries that are not yet in use (in an allocated 4-KB directory block), the inode number should be set to -1. This way, utilities can scan through the entries to check if they are valid.

When your server is started, it is passed the name of the file system image file. If this file does not exist, the file server should create it, and initialize it properly, and force it to disk. Such initialization includes creating the checkpoint region, the initial inode map, and creating a single root directory with proper . and .. entries. The root inode number should be 0.

When booting off of an existing image, your server should read in the checkpoint region (and keep an in-memory version of it), as well as the entire inode map and keep it in-memory too.

Client library

The client library should export the following interfaces:

  • int MFS_Init(char *hostname, int port): MFS_Init() takes a host name and port number and uses those to find the server exporting the file system.
  • int MFS_Lookup(int pinum, char *name): MFS_Lookup() takes the parent inode number (which should be the inode number of a directory) and looks up the entry name in it. The inode number of name is returned. Success: return inode number of name; failure: return -1. Failure modes: invalid pinum, name does not exist in pinum.
  • int MFS_Stat(int inum, MFS_Stat_t *m): MFS_Stat() returns some information about the file specified by inum. Upon success, return 0, otherwise -1. The exact info returned is defined by MFS_Stat_t. Failure modes: inum does not exist.
  • int MFS_Write(int inum, char *buffer, int block): MFS_Write() writes a block of size 4096 bytes at the block offset specified by block . Returns 0 on success, -1 on failure. Failure modes: invalid inum, invalid block, not a regular file (because you can't write to directories).
  • int MFS_Read(int inum, char *buffer, int block): MFS_Read() reads a block specified by block into the buffer from file specified by inum . The routine should work for either a file or directory; directories should return data in the format specified by MFS_DirEnt_t. Success: 0, failure: -1. Failure modes: invalid inum, invalid block.
  • int MFS_Creat(int pinum, int type, char *name): MFS_Creat() makes a file ( type == MFS_REGULAR_FILE) or directory ( type == MFS_DIRECTORY) in the parent directory specified by pinum of name name . Returns 0 on success, -1 on failure. Failure modes: pinum does not exist, or name is too long. If name already exists, return success (think about why).
  • int MFS_Unlink(int pinum, char *name): MFS_Unlink() removes the file or directory name from the directory specified by pinum . 0 on success, -1 on failure. Failure modes: pinum does not exist, directory is NOT empty. Note that the name not existing is NOT a failure by our definition (think about why this might be).
  • int MFS_Shutdown(): MFS_Shutdown() just tells the server to force all of its data structures to disk and shutdown by calling exit(0). This interface will mostly be used for testing purposes.

Server Idempotency

The key behavior implemented by the server is idempotency. Specifically, on any change to the file system state (such as a MFS_Write, MFS_Creat, or MFS_Unlink), all the dirtied buffers in the server are committed to the disk. The server can achieved this end by calling fsync() on the file system image. Thus, before returning a success code, the file system should always fsync() the image.

Now you might be wondering: why do this? Simple: if the server crashes, the client can simply timeout and retry the operation and know that it is OK to do so. We'll be talking about this more when we talk about NFS, the Network File System from the company formerly known as Sun.

Now you might be wondering: how do I implement a timeout? Simple, with the select() interface. The select() calls allows you to wait for a reply on a certain socket descriptor (or more than one, though that is not needed here). You can even specify a timeout so that the client does not block forever waiting for data to be returned from the server. By doing so, you can wait for a reply for a certain amount of time, and if nothing is returned, try the operation again until it is successful.

Program Specifications

Your server program must be invoked exactly as follows:

prompt> server [portnum] [file-system-image]

The command line arguments to your file server are to be interpreted as follows.

  • portnum: the port number that the file server should listen on.
  • file-system-image: a file that contains the file system image.

If the file system image does not exist, you should create it and properly initialize it to include an empty root directory.

Your client library should be called and be built as usual. It should implement the interface as specified by mfs.h , and in particular deal with the case where the server does not reply in a timely fashion; the way it deals with that is simply by retrying the operation, after a timeout of some kind (default: five second timeout).

Some Helper Code

To get you going, we have written some simple UDP code that can send a message and then receive a reply from a client to a server. It can be found in the ~cs537-1/public/p5/ directory.