1. Upload G-code File

Select a Gcode file:

2. Set Simulation Parameters and Run

1. Number of time steps (Integer):
2. Travel speed (mm/s):
3. Infill speed (mm/s):
4. Deposit temperature (°C):
5. Envelope temperature (°C):
6. Platform temperature (°C):
7. Density (kg/m^3)
8. Heat Capacity (J/(kg * K))
9. Conductivity (W/(m * K))
10. Convection Coefficient (W/(m^2 * K))
11. Layer Height (m)
12. Road Width (m)
13. Active Body Parameter p (s)
14. Active Body Parameter q (Integer)
15. Active Body Parameter s (Integer)