Java Exceptions

Contents

• Error Handling
• Exceptions
  • How to catch exceptions
  • Checked and unchecked exceptions
  • Exception hierarchy
  • Choices when calling a method that may throw an exception
  • Test Yourself #1
  • Defining an exception
  • Throwing an exception
  • Test Yourself #2
• Summary

Runtime errors can be divided into low-level errors that involve violating constraints, such as:

• dereference of a null pointer
• out-of-bounds array access
• divide by zero
• attempt to open a non-existent file for reading
• bad cast (e.g., casting an Object that is actually a Boolean to Integer)

and higher-level, logical errors, such as violations of a method's preconditions:

• a call to an Iterator's "next" method when there are no more items
• a call to a Stack's "pop" method for an empty stack
• a call to "factorial" with a negative number

Logical errors can lead to low-level errors if they are not detected. Often, it is better to detect them (to provide better feedback).

Errors can arise due to:

• User error (for example, providing a bad file name or a poorly formatted input file): A good program should be written to anticipate these situations and should deal with them. For example, given a bad file name, an interactive program could print an error message and prompt for a new name.

• Programmer error (i.e., a buggy program): These errors should be detected as early as possible to provide good feedback. For some programs it may be desirable to do some recovery after detecting this kind of error, for example, writing out current data.

Note that recovery is often not possible at the point of the error (because the error may occur inside some utility method that doesn't know anything about the overall program or what error recovery should involve). Therefore, it is desirable to "pass the error up" to a level that can deal with it.

There are several possible ways to handle errors:

• Write an error message and quit. This doesn't provide any recovery.

• Return a special value to indicate that an error occurred. This is the usual approach for C functions (which often return 0 or -1 to signal an error). However:

  • It doesn't work if the method also returns a value on normal completion and all values are possible (i.e., there is no special value that can be used to signal an error).

  • It requires that the calling code check for an error. This can reduce the efficiency of the code and is often omitted by programmers out of laziness or carelessness.

  • It can sometimes make the code more clumsy. For example, if method g might return an error code, one would have to write something like:

    ret = g(x);
    if (ret == ERROR_CODE) { ... }
    else f(ret);
    	      

    instead of just:

    f(g(x));
    	      

• Use a reference parameter or a global variable to hold an error code. This solves the first problem of the previous approach, but not the second or third ones.

• Use exceptions. This is the method of choice for many modern programming languages.

Idea:

Exceptions can be built-in (actually, defined in one of Java's standard libraries) or user-defined. Here are some examples of built-in exceptions with links to their documentation:

• ArithmeticException (e.g., divide by zero)
• ClassCastException (e.g., attempt to cast a String object to Integer)
• IndexOutOfBoundsException
• NullPointerException
• NoSuchElementException (e.g., there are no more elements in collection or enumeration)
• FileNotFoundException (e.g., attempt to open a non-existent file for reading)

Exceptions are caught using try blocks:

try {
    // statements that might cause exceptions
    // possibly including method calls
} catch ( ExceptionType1 id1 ) {
    // statements to handle this type of exception 
} catch ( ExceptionType2 id2 ) {
    // statements to handle this type of exception 
    .
    .
    .
} finally {
    // statements to execute every time this try block executes
}

Notes:

1. Each catch clause specifies the type of one exception and provides a name for it (similar to the way a method header specifies the type and name of a parameter). Java exceptions are objects, so the statements in a catch clause can refer to the thrown exception object using the specified name.

2. The finally clause is optional; a finally clause is usually included if it is necessary to do some clean-up (e.g., closing opened files).

3. In general, there can be one or more catch clauses. If there is a finally clause, there can be zero catch clauses.

Example

Here is a program that tries to open a file for reading. The name of the file is given by the first command-line argument .

public class Test {
    public static void main(String[] args) {
        Scanner fileIn;
        File inputFile;
    
        try {
            inputFile = new File(args[0]);
            fileIn =   new Scanner(inputFile);  // may throw FileNotFoundException
        } catch (FileNotFoundException ex) {
            System.out.println("file " + args[0] + " not found");
        }
    }
}

Notes:

1. The program really should make sure there is a command-line argument before attempting to use args[0].
2. Also, it probably makes more sense to put the try block in a loop, so that if the file is not found the user can be asked to enter a new file name and a new attempt to open the file can be made.
3. As is, if the user runs the program with a bad file name foo, the message "file foo not found" will be printed and the program will halt.
4. If there were no try block and the program were run with a bad file name foo, a more complicated message, something like this:

   java.io.FilenotFoundException: foo
       at java.io.FileInputStream ...
       at ...
       at Test.main ...
   	 

   would be printed. (Actually, if there were no try/catch for the FileNotFoundException, the program wouldn't compile because it fails to list that exception as one that might be thrown. We'll come back to that issue later.)

Every exception is either a checked exception or an unchecked exception. If a method includes code that could cause a checked exception to be thrown, then:

• the exception must be declared in the method header using a throws clause, or
• the code that might cause the exception to be thrown must be inside a try block with a catch clause for that exception.

So, in general, you must always include some code that acknowledges the possibility of a checked exception being thrown. If you don't, you will get an error when you try to compile your code. (The compiler does not check to see if you have included code that acknowledges the possibility of an unchecked exception being thrown.)

How can you determine if an exception is checked or unchecked? The answer lies in the exception hierarchy:

• If an exception is a subclass of RuntimeException, then it is unchecked.
• If an exception is a subclass of Exception but not a subclass of RuntimeException, then it is checked.

    +--------+                      
    | Object |
    +--------+
    /  |     \
              \
           +-----------+
           | Throwable |
           +-----------+
           /           \
          /             \
    +-------+         +-----------+
    | Error |         | Exception |
    +-------+         +-----------+
     /  |  \          /     |     \
                     /      |      \
   +------------------+           +-------------+
   | RuntimeException |           | IOException |
   +------------------+           +-------------+
     /          |    \             /     |      \
    /           |     \           /      |       \
                |                           +-----------------------+
                |                           | FileNotFoundException |
     +----------------------+               +-----------------------+
     | NullPointerException |
     +----------------------+

Note that:

• Most of the built-in exceptions (e.g., NullPointerException, IndexOutOfBoundsException) are unchecked.
• I/O exceptions (e.g., FileNotFoundException) are checked.
• User-defined exceptions should usually be checked, so they should be subclasses of Exception.

If you are writing code that calls a method that might throw an exception, your code can do one of three things:

1. Catch and handle the exception.
2. Catch the exception, then re-throw it or throw another exception.
3. Ignore the exception (let it "pass up" the call chain).

As mentioned above, if your code might cause a checked exception to be thrown; i.e.,

• your code throws a checked exception, or
• your code ignores a checked exception that might be thrown by a called method

then your method must include a throws clause listing all such exceptions. For example:

public static void main(String[] args) throws FileNotFoundException, EOFException
{ 
    // an uncaught FileNotFoundException or EOFException may be thrown here
}

Only uncaught checked exceptions need to be listed in a method's throws clause. Unchecked exceptions can be caught in a try block, but if not, they need not be listed in the method's throws clause.

Consider the following program (assume that comments are replaced with actual code that works as specified):

public class TestExceptions {

    static void e() {
      // might cause any of the following unchecked exceptions to be thrown:
      // Ex1, Ex2, Ex3, Ex4
    }
    
    static void d() {
      try {
          e();
      } catch (Ex1 ex) {
          System.out.println("d caught Ex1");
      }
    }
    
    static void c() {
      try {
          d();
      } catch (Ex2 ex) {
          System.out.println("c caught Ex2");
          // now cause exception Ex1 to be thrown
      }
    }
    
    static void b() {
      try {
          c();
      } catch (Ex1 ex) {
          System.out.println("b caught Ex1");
      } catch (Ex3 ex) {
          System.out.println("b caught Ex3");
      }
    }
    
    static void a() {
      try {
          b();
      } catch (Ex4 ex) {
          System.out.println("a caught Ex4");
          // now cause exception Ex1 to be thrown
      } catch (Ex1 ex) {
          System.out.println("a caught Ex1");
      }
    }
    
    public static void main(String[] args) {
        a();
    }
}

Assume that this program is run four times. The first time, method e throws exception Ex1, the second time, it throws exception Ex2, etc. For each of the four runs, say what is printed and whether any uncaught exception is thrown.

solution

Java exceptions are objects. We can define a new kind of exception by defining an instantiable class. This new class must be a subclass of Throwable; as discussed above, they are usually subclasses of Exception (so that they are checked). The simplest way to define a new exception is shown in this example:

public class EmptyStackException extends Exception { }

There is no need to provide any methods or fields; the class can have an empty body as shown above.

Many (if not most) of the exceptions defined in the Java API provide a constructor that takes a string as an argument (in addition to a default constructor). The purpose of the argument is to allow a detailed error message to be given when the exception object is created. You can access this message by calling the getMessage() method on the exception object. Providing this option in the exceptions you write is only slightly more complicated:

public class EmptyStackException extends Exception {
    public EmptyStackException() {
        super();
    }
    
    public EmptyStackException(String message) {
        super(message);
    }
}

At the point where an error is detected, an exception is thrown using a throw statement:

public class Stack {
        ...
    public Object pop() throws EmptyStackException {
        if (empty()) 
            throw new EmptyStackException();
        ...
    }
}

Note that because exceptions are objects, so you cannot simply throw "EmptyStackException" -- you must use "new" to create an exception object. Also, since the pop method might throw the (checked) exception EmptyStackException, that exception must be listed in pop's throws clause.

Question 1: Assume that method f might throw checked exceptions Ex1, Ex2, or Ex3. Complete method g, outlined below, so that:

• If the call to f causes Ex1 to be thrown, g will catch that exception and print "Ex1 caught".
• If the call to f causes Ex2 to be thrown, g will catch that exception, print "Ex2 caught" and then will throw an Ex1 exception.

static void g() throws ... {
    try {
        f();
    } catch ( ... ) {
        ...
    } ...
}

Question 2: Consider the following method.

static void f(int k, int[] A, String S) {
    int j = 1 / k;
    int len = A.length + 1;
    char c;
    
    try {
        c = S.charAt(0);
        if (k == 10) j = A[3];
    } catch (ArrayIndexOutOfBoundsException ex) {
        System.out.println("array error");
        throw new InternalError();
    } catch (ArithmeticException ex) {
        System.out.println("arithmetic error");
    } catch (NullPointerException ex) {
        System.out.println("null ptr");
    } finally {
        System.out.println("in finally clause");
    }
    System.out.println("after try block");
}

Part A: Assume that variable X is an array of int that has been initialized to be of length 3. For each of the following calls to method f, say what (if anything) is printed by f and what, if any, uncaught exceptions are thrown by f.

1. f(0, X, "hi")
2. f(10, X, "")
3. f(10, X, "bye")
4. f(10, X, null)

Part B: Why doesn't f need to have a throws clause that lists the uncaught exceptions that it might throw?

solution

• Code that detects errors often does not know how to handle them. Therefore, we need a way to "pass errors up". The best approach is to use exceptions.
• Java provides both built-in and user-defined exceptions.
• Exceptions are caught using a try block:

  try {
      // statements (including method calls) that might cause exceptions
  } catch ( ExceptionType1 id1 ) {
      // code to handle this first type of exception 
  } catch ( ExceptionType2 id2 ) {
      // code to handle this second type of exception 
      .
      .
      .
  } finally {
      // code that will execute whenever this try block executes
  }
  

• Exceptions are thrown using a throw statement.
• If an exception is thrown in code that is not inside a try block, or is in a try block with no catch clause for the thrown exception, the exception is "passed up" the call stack.
• Some exceptions are checked and some are unchecked. If a method might throw one or more checked exceptions, they must be listed in the method's throws clause.
• Exceptions are objects; they are defined as classes (the class name is the name of the exception) that extend the Exception class.

Next: Continue with Linked Lists