CS 537
Lecture Notes Part 2
Notes on Java

Contents

• Introduction
• A First Example
• Names, Packages, and Separate Compilation
• Values, Objects, and Pointers
• Garbage Collection
• Static, Final, Public, and Private
• Arrays
• Strings
• Constructors and Overloading
• Inheritance, Interfaces, and Casts
• Exceptions
• Threads
• Input and Output
• Other Goodies

Introduction

The purpose of these notes is to help students in Computer Sciences 537 (Introduction to Operating Systems) at the University of Wisconsin - Madison learn enough Java to do the course projects. This course will assume that all students are Java programmers at the level of someone who has completed CS 367 with an A or AB. Just about everything you will need to know about Java is at least mentioned in this section, together with comments about the differences from C++, but if you're a novice Java programmer, you may need a gentler introduction. If you are familiar with C++ but not Java, check out the excellent Java for C++ Programmers from CS 368. See The Java Tutorial and/or the The Java Programming Language by Arnold et al for lots more information about Java.

A few years ago, the Computer Sciences Department converted most of its classes from C++ to Java as the principal language for programming projects. CS 537 was the first course to make the switch, Fall term, 1996. At that time virtually all the students had heard of Java and none had used it. Over the next few years more and more of our courses were converted to Java until, by 1998-99, the introductory programming prerequisites for this course, CS 302 and CS 367, were taught in Java. The department now offers a "C++ for Java Programmers" course, CS 368.

The remainder of these notes provide some advise on programming and style that may be helpful to 537 students. In particular, we describe threads and synchronized methods, Java features that you probably haven't seen before. Note that some of the examples assume that you are using Java version 1.5 or later.

The Java API

The Java language is actually rather small and simple - an order of magnitude smaller and simpler than C++, and in some ways, even smaller and simpler than C. However, it comes with a very large and constantly growing library of utility classes. Fortunately, you only need to know about the parts of this library that you really need, you can learn about it a little at a time, and there is excellent, browsable, on-line documentation. These libraries are grouped into packages. One set of packages, called the Java 2 Platform API comes bundled with the language (API stands for "Application Programming Interface"). At last count, there were over 166 packages in the Platform API, but you will probably only use classes from three of them:

• java.lang contains things like character strings, that are essentially "built in" to the langauge.
• java.io contains support for input and output, and
• java.util contains some handy data structures such as lists and hash tables.

Names, Packages, and Separate Compilation

Case is significant in identifiers in Java, so if and If are considered to be quite different. The language has a small set of reserved words such as if, while, etc. They are all sequences of lower-case letters. The Java language places no restrictions on what names you use for functions, variables, classes, etc. However, there is a standard naming convention, which all the standard Java libraries follow, and which you must follow in this class.

• Names of classes are in MixedCase starting with a capital letter. If the most natural name for the class is a phrase, start each word with a capital letter, as in StringBuffer.
• Names of "constants" (see below) are ALL_UPPER_CASE. Separate words of phrases with underscores as in MIN_VALUE.
• Other names (functions, variables, reserved words, etc.) are in lower case or mixedCase, start with a lower-case letter, and do not contain under_scores.

Simple class definitions in Java look rather like class definitions in C++ (although, as we shall see later, there are important differences).

    public class Pair { int x, y; } 

    javac Pair.java 

There are exceptions to the rule that requires a separate source file for each class but you should ignore them. In particular, class definitions may be nested. However, this is an advanced feature of Java, and you should not nest class definitions unless you know what you're doing.

There is a large set of predefined classes, grouped into packages. The full name of one of these predefined classes includes the name of the package as prefix. For example, the library class java.util.Random is in package java.util, and a program may use the class with code like this:

    java.util.Random r = new java.util.Random();

    import java.util.Random;

    Random r = new Random();

    import java.util.*;

    import java.lang.*;

The import statement doesn't really "import" anything. It just introduces a convenient abbreviation for a fully-qualified class name. When a class needs to use another class, all it has to do is use it. The Java compiler will know that it is supposed to be a class by the way it is used, will import the appropriate .class file, and will even compile a .java file if necessary. (That's why it's important for the name of the file to match the name of the class). For example, here is a simple program that uses two classes:

    public class HelloTest {
        public static void main(String[] args) {
            Hello greeter = new Hello();
            greeter.speak();
        }
    }
    public class Hello {
        void speak() {
            System.out.println("Hello World!");
        }
    }

    javac HelloTest.java
    java HelloTest

    rm -f *.class
    javac -verbose HelloTest.java
    java HelloTest

Values, Objects, and Pointers

It is sometimes said that Java doesn't have pointers. That is not true. In fact, objects can only be referenced with pointers. More precisely, variables can hold primitive values (such as integers or floating-point numbers) or references (pointers) to objects. A variable cannot hold an object, and you cannot make a pointer to a primitive value.

There are exactly eight primitive types in Java, boolean, char, byte, short, int, long, float, and double.

A boolean value is either true or false. You cannot use an integer where a boolean is required (e.g. in an if or while statement) nor is there any automatic conversion between boolean and integer.

A char value is 16 bits rather than 8 bits, as it is in C or C++, to allow for all sorts of international alphabets. As a practical matter, however, you are unlikely to notice the difference.

There are four integer types, each of which represents a signed integer with a specific number of bits.

Type	Bits	Min Value	Max Value
byte	8	-128	127
short	16	-32,768	32,767
int	32	-2,147,483,648	2,147,483,647
long	64	-9,223,372,036,854,775,808	9,223,372,036,854,775,807

The types float and double represent 32-bit and 64-bit floating point values.

Objects are instances of classes. They are created by the new operator. Each object is an instance of a unique class, which is itself an object. Class objects are automatically created whenever you refer the class; there is no need to use new. Each object "knows" what class it is an instance of.

    Pair p = new Pair();
    Class c = p.getClass();
    System.out.println(c);  // prints "class Pair"

    int i = 0;

Arguments to a Java procedure are passed "by value".

    void f() {
        int n = 1;
        Pair p = new Pair();
        p.x = 2; p.y = 3;
        System.out.println(n);    // prints 1
        System.out.println(p.x);  // prints 2
        g(n,p);
        System.out.println(n);    // still prints 1
        System.out.println(p.x);  // prints 100
    }
    void g(int num, Pair ptr) {
        System.out.println(num);  // prints 1
        num = 17;                 // changes only the local copy
        System.out.println(num);  // prints 17

        System.out.println(ptr.x);// prints 2
        ptr.x = 100;              // changes the x field of caller's Pair
        ptr = null;               // changes only the local ptr
    }

Unlike C++, Java has no way of declaring reference parameters, and unlike C++ or C, Java has no way of creating a pointer to a (non-object) value, so you can't do something like this

    /* C or C++ */
    void swap1(int *xp, int *yp) {
        int tmp;
        tmp = *xp;
        *xp = *yp;
        *yp = tmp;
    }
    int foo = 10, bar = 20;
    swap1(&foo, &bar);  /* now foo==20 and bar==10 */

    // C++ only
    void swap2(int &xp, int &yp) {
        int tmp;
        tmp = xp;
        xp = yp;
        yp = tmp;
    }
    int this_one = 88, that_one = 99;
    swap2(this_one, that_one);  // now this_one==99 and that_one==88

Garbage Collection

New objects are create by the new operator in Java just like C++ (except that an argument list is required after the class name, even if the constructor for the class doesn't take any arguments so the list is empty). However, there is no delete operator. The Java system automatically deletes objects when no references to them remain. This is a much more important convenience than it may at first seem. delete operator is extremely error-prone. Deleting objects too early can lead to dangling reference, as in

    // This is C++ code
    p = new Pair();
    // ...
    q = p;
    // ... much later
    delete p;
    q -> x  = 5; // oops!

Static, Final, Public, and Private

Each field or method of a class has an access, which is one of public, protected, private, or package. The first three of these are specified by preceding the field or method declaration by one of the words public, protected, or private. Package access is specified by omitting these words.

    public class Example {
        public int a;
        protected int b;
        private int c;
        int d; // has package access
    }

Private members can only be accessed from inside the bodies of methods (function members) of the class, not "from the outside." Thus if x is an instance of C, x.i is not legal, but i can be accessed from the body of x.f(). (protected access is discussed further below).

The keyword static does not mean "unmoving" as it does in common English usage. Instead is means something like "class" or "unique". Ordinary members have one copy per instance, whereas a static member has only one copy, which is shared by all instances. Ordinary (non-static) fields are sometimes called "instance variables". In effect, a static member lives in the class object itself, rather than instances.

    public class C {
        public int x = 1;
        public static int y = 1;
        public void f(int n) { x += n; }
        public static int g() { return ++y; }
    }
    // ... elsewhere ...
    C p = new C();
    C q = new C();
    p.f(3);
    q.f(5);
    System.out.println(p.x);  // prints 4
    System.out.println(q.x);  // prints 6
    System.out.println(C.y);  // prints 1
    System.out.println(p.y);  // means the same thing as C.y; prints 1
    System.out.println(C.g());// prints 2
    System.out.println(q.g());// prints 3
    C.x;   // invalid; which instance of x?
    C.f(); // invalid; which instance of f?

.

Static members are often used instead of global variables and functions, which do not exist in Java. For example,

    Math.tan(x);            // tan is a static method of class Math
    Math.PI;                // a static "field" of class Math with value 3.14159...
    Integer.parseInt("123"); // converts a string of digits into a number

     import static java.lang.Math.*;
...
    double theta = tan(y / x);
    double area = PI * r * r;

    import static java.lang.System.*;
    ...
    out.println(p.x); // same as System.out.println(q.x), but shorter

    import static java.lang.System.*;

The keyword final means that a field or variable may only be assigned a value once. It is often used in conjunction with static to defined named constants.

    public class Card {
        public int suit = CLUBS;     // default
        public final static int CLUBS = 1;
        public final static int DIAMONDS = 2;
        public final static int HEARTS = 3;
        public final static int SPADES = 4;
    }
    // ... elsewhere ...
    Card c = new Card();
    out.println("suit " + c.suit);
    c.suit = Card.SPADES;
    out.println("suit " + c.suit);

Java 1.5 introduced enums, which are the preferable way of declaring a variable that can only take on a specified set of distinct values. Using enums, the example becomes

    enum Suit { CLUBS, DIAMONDS, HEARTS, SPADES };
    class Card {
        public Suit suit = Suit.CLUBS;     // default
    }
    // ... elsewhere ...
    Card c = new Card();
    out.println("suit " + c.suit);
    c.suit = Card.SPADES;
    out.println("suit " + c.suit);

    suit CLUBS
    suit SPADES

    suit 1
    suit 4

Arrays

In Java, arrays are objects. Like all objects in Java, you can only point to them. Unlike a C++ array variable, which is treated like a pointer to the first element of the array, a Java array variable points to the whole object. There is no way to point to a particular slot in an array.

Each array has a read-only (final) field length that tells you how many elements it has. The elements are numbered starting at zero: a[0] ... a[a.length-1]. Once you create an array (using new), you can't change its size. If you need more space, you have to create a new (larger) array and copy over the elements (but see the List library classes below).

    int[] arrayOne;         // a pointer to an array object; initially null
    int arrayTwo[];         // allowed for compatibility with C; don't use this!
    arrayOne = new int[10]; // now arrayOne points to an array object
    arrayOne[3] = 17;       // accesses one of the slots in the array
    arrayOne = new int[5];  // assigns a different array to arrayOne
                            // the old array is inaccessible (and so
                            // is garbage-collected)
    out.println(arrayOne.length);
                            // prints 5
    int[] alias = arrayOne; // arrayOne and alias share the same array object
                            // Careful! This could cause surprises
    alias[3] = 17;          // Changes an element of the array pointed to by
                            // alias, which is the same as arrayOne
    out.println(arrayOne[3]);
                            // prints 17

.

Strings

Since you can make an array of anything, you can make an an array of char or an an array of byte, but Java has something much better: the type String. The + operator is overloaded on Strings to mean concatenation. What's more, you can concatenate anything with a string; Java automatically converts it to a string. Built-in types such as numbers are converted in the obvious way. Objects are converted by calling their toString() methods. Library classes all have toString methods that do something reasonable. You should do likewise for all classes you define. This is great for debugging.

    String s = "hello";
    String t = "world";
    out.println(s + ", " + t);       // prints "hello, world"
    out.println(s + "1234");         // "hello1234"
    out.println(s + (12*100 + 34));  // "hello1234"
    out.println(s + 12*100 + 34);    // "hello120034" (why?)
    out.println("The value of x is " + x);  // will work for any x
    out.println("System.out = " + System.out);
                // "System.out = java.io.PrintStream@80455198"
    String numbers = "";
    for (int i=0; i<5; i++) {
        numbers += " " + i;  // correct but slow
    }
    out.println(numbers);            // " 0 1 2 3 4"

    String s = "whatever", t = "whatnow";
    s.charAt(0);            // 'w'
    s.charAt(3);            // 't'
    t.substring(4);         // "now" (positions 4 through the end)
    t.substring(4,6);       // "no"  (positions 4 and 5, but not 6)
    s.substring(0,4);       // "what" (positions 0 through 3)
    t.substring(0,4);       // "what"
    s.compareTo(t);         // a value less than zero
                            // s precedes t in "lexicographic"
                            // (dictionary) order
    t.compareTo(s);         // a value greater than zero (t follows s)
    t.compareTo("whatnow"); // zero
    t.substring(0,4) == s.substring(0,4);
                            // false (they are different String objects)
    t.substring(0,4).equals(s.substring(0,4));
                            // true (but they are both equal to "what")
    t.indexOf('w');         // 0
    t.indexOf('t');         // 3
    t.indexOf("now");       // 4
    t.lastIndexOf('w');     // 6
    t.endsWith("now");      // true

You can't modify a string, but you can make a string variable point to a new string (as in numbers += " " + i;). The example above is not good way to build up a string a little at a time. Each iteration of numbers += " " + i; creates a new string and makes the old value of numbers into a garbage object, which requires time to garbage-collect. Try running this code

    public class Test {
        public static void main(String[] args) {
            String numbers = "";
            for (int i = 0; i < 10000; i++) {
                numbers += " " + i;  // correct but slow
            }
            out.println(numbers.length());
        }
    }

    public class Test {
        public static void main(String[] args) {
            StringBuffer sb = new StringBuffer();
            for (int i = 0; i < 10000; i++) {
                sb.append(" " + i);
            }
            String numbers = sb.toString();
            out.println(numbers.length());
        }
    }

Constructors and Overloading

A constructor is method with the same name as the class. It does not have any return type, not even void. If a constructor has arguments, you supply corresponding values when using new. Even if it has no arguments, you still need the parentheses (unlike C++). There can be multiple constructors, with different numbers or types of arguments. The same is true for other methods. This is called overloading. Unlike C++, you cannot overload operators. The operator "+" is overloaded for strings and (various kinds of) numbers, but user-defined operator overloading is not supported.

    class Pair {
        int x, y;
        Pair(int u, int v) {
            x = u;  // the same as this.x = u
            y = v;
        }
        Pair(int x) {
            this.x = x;  // not the same as x = x!
            y = 0;
        }
        Pair() {
            x = 0;
            y = 0;
        }
    }
    class Test {
        public static void main(String[] argv) {
            Pair p1 = new Pair(3,4);
            Pair p2 = new Pair();  // same as new Pair(0,0)
            Pair p3 = new Pair;    // error!
        }
    }

Inheritance, Interfaces, and Casts

Java supports two kinds of inheritance, which are sometimes called interface inheritance or sub-typing, and method inheritance.

Method inheritance is specified with the keyword extends.

    class Base {
        int f() { /* ... */ }
        void g(int x) { /* ... */ }
    }
    class Derived extends Base {
        void g(int x) { /* ... */ }
        double h() { /* ... */ }
    }

Interface inheritance is specified with implements. A class implements an Interface, which is like a class, except that the methods don't have bodies. Two examples are given by the built-in interfaces Runnable and Enumeration.

    interface Runnable {
        void run();
    }
    interface Enumeration {
        Object nextElement();
        boolean hasMoreElements();
    }

    class Words extends StringTokenizer implements Enumeration, Runnable {
        public void run() {
            for (;;) {
                String s = nextToken();
                if (s == null) {
                    return;
                }
                out.println(s);
            }
        }
        Words(String s) {
            super(s);
            // perhaps do something else with s as well
        }
    }

    w.run();

    if (w.hasMoreElements()) ...

By the way, constructors are not inherited. The call super(s) in class Words calls the constructor of StringTokenizer that takes one String argument. If you don't explicitly call super, Java automatically calls the super class constructor with no arguments (such a constructor must exist in this case). Note the call nextToken() in Words.run, which is short for this.nextToken(). Since this is an instance of Words, it has a nextToken method -- the one it inherited from StringTokenizer.

Interfaces can also be used to declare variables.

    Enumeration e = new StringTokenizer("hello there");

A cast in Java is a type name in parentheses preceding an expression. A cast can be applied to primitive types.

    double pi = Math.PI;
    int three = (int) pi;  // throws away the fraction 

    Words w = new Words("this is a test");
    Object o = w.nextElement();
    String s = (String) o;
    out.println("The first word has length " + s.length());

    if (o instanceof String) {
        n = ((String) o).length();
    } else {
        err.println("Bad type " + o.getClass().getName());
    }

Exceptions

A Java program should never "core dump," no matter how buggy it is. If the compiler excepts it and something goes wrong at run time, Java throws an exception. By default, an exception causes the program to terminate with an error message, but you can also catch an exception.

    try {
        // ...
        foo.bar();
        // ...
        a[i] = 17;
        // ...
    }
    catch (IndexOutOfBoundsException e) {
        err.println("Oops: " + e);
    }

WARNING Never write an empty catch clause. If you do, you will regret it. Maybe not today, but tomorrow and for the rest of your life.

Because we caught this exception, it will not terminate the program. If some other kind of exception occurs (such as divide by zero), the exception will be thrown back to the caller of this function and if that function doesn't catch it, it will be thrown to that function's caller, and so on back to the main function, where it will terminate the program if it isn't caught. Similarly, if the function foo.bar throws an IndexOutOfBoundsException and doesn't catch it, we will catch it here.

The catch clause actually catches IndexOutOfBoundsException or any of its subclasses, including ArrayIndexOutOfBoundsException , StringIndexOutOfBoundsException , and others. An Exception is just another kind of object, and the same rules for inheritance hold for exceptions as any other king of class.

You can define and throw your own exceptions.

    class SytaxError extends Exception {
        int lineNumber;
        SytaxError(String reason, int line) {
            super(reason);
            lineNumber = line;
        }
        public String toString() {
            return "Syntax error on line " + lineNumber + ": " + getMessage();
        }
    }
    class SomeOtherClass {
        public void parse(String line) throws SyntaxError {
            // ...
            if (...)
                throw new SyntaxError("missing comma", currentLine);
            //...
        }
        public void parseFile(String fname) {
            //...
            try {
                // ...
                nextLine = in.readLine();
                parse(nextLine);
                // ...
            }
            catch (SyntaxError e) {
                err.println(e);
            }
        }
    }

There can be several catch clauses at the end of a try statement, to catch various kinds of exceptions. The first one that "matches" the exception (i.e., is a super class of it) is executed. You can also add a finally clause, which will always be executed, no matter how the program leaves the try clause (whether by falling through the bottom, executing a return, break, or continue, or throwing an exception).

Threads

Java lets you do several things at once by using threads. If your computer has more than one CPU, it may actually run two or more threads simultaneously. Otherwise, it will switch back and forth among the threads at times that are unpredictable unless you take special precautions to control it.

There are two different ways to create threads. I will only describe one of them here.

    Thread t = new Thread(command); // 
    t.start();  // t start running command, but we don't wait for it to finish
    // ... do something else (perhaps start other threads?)
    // ... later:
    t.join();  // wait for t to finish running command

In project 1, you are supposed to run each command in a separate thread. Thus you might declare something like this:

    class Command implements Runnable {
        String commandLine;
        Command(String commandLine) {
            this.commandLine = commandLine;
        }
        public void run() {
            // Do what commandLine says to do
        }
    }

The main program loop reads a command line, breaks it up into commands, runs all of the commands concurrently (each in a separate thread), and waits for them to all finish before issuing the next prompt. In outline, it may look like this.

    for (;;) {
        out.print("% "); out.flush();
        String line = inputStream.readLine();
        int numberOfCommands = // count how many commands there are on the line
        Thread t[] = new Thread[numberOfCommands];
        for (int i=0; i<numberOfCommands; i++) {
            String c = // next command on the line
            t[i] = new Thread(new Command(c));
            t[i].start();
        }
        for (int i=0; i<numberOfCommands; i++) {
            t[i].join();
        }
    }

Although you won't need it for project 1, the next project will require to to synchronize threads with each other. There are two reasons why you need to do this: to prevent threads from interfering with each other, and to allow them to cooperate. You use synchronized methods to prevent interference, and the built-in methods Object.wait() , Object.notify() , Object.notifyAll() , and Thread.yield() to support cooperation.

Any method can be preceded by the word synchronized (as well as public, static, etc.). The rule is:

The Java system enforces this rule by associating a monitor lock with each object. When a thread calls a synchronized method of an object, it tries to grab the object's monitor lock. If another thread is holding the lock, it waits until that thread releases it. A thread releases the monitor lock when it leaves the synchronized method. If one synchronized method of a calls contains a call to another, a thread may have the same lock "multiple times." Java keeps track of that correctly. For example,

    class C {
        public synchronized void f() {
            // ...
            g();
            // ...
        }
        public synchronized void g() { /* ... */ }
    }

Sometimes a thread needs to wait for another thread to do something before it can continue. The methods wait() and notify(), which are defined in class Object and thus inherited by all classes, are made for this purpose. They can only be called from within synchronized methods. A call to wait() releases the monitor lock and puts the calling thread to sleep (i.e., it stops running). A subsequent call to notify on the same object wakes up a sleeping thread and lets it start running again. If more than one thread is sleeping, one is chosen arbitrarily² and if no threads are sleeping in this object, notify() does nothing. The awakened thread has to wait for the monitor lock before it starts; it competes on an equal basis with other threads trying to get into the monitor. The method notifyAll is similar, but wakes up all threads sleeping in the object.

    class Buffer {
        private List queue = new ArrayList();
        public synchronized void put(Object o) {
            queue.add(o);
            notify();
        }
        public synchronized Object get() {
            while (queue.isEmpty()) {
                wait();
            }
            return queue.remove(0);
        }
    }

This example is not correct as it stands (and the Java compiler will reject it). The wait() method can throw an InterruptedException exception, so the get() method must either catch it or declare that it throws InterruptedException as well. The simplest solution is just to catch the exception and print it:

    class Buffer {
        private List queue = new ArrayList();
        public synchronized void put(Object o) {
            queue.add(o);
            notify();
        }
        public synchronized Object get() {
            while (queue.isEmpty()) {
                try {
                    wait();
                } catch (InterruptedException e) {
                    e.printStackTrace();
                }
            }
            return queue.remove(0);
        }
    }

There is also a version of Object.wait() that takes an integer parameter. The call wait(n) will return after n milliseconds if nobody wakes up the thread with notify or notifyAll sooner.

You may wonder why Buffer.get() uses while (queue.isEmpty()) rather than if (queue.isEmpty()). In this particular case, either would work. However, in more complicated situations, a sleeping thread might be awakened for the "wrong" reason. Thus it is always a good idea when you wake up to recheck the condition that made to decide to go to sleep before you continue.

Input and Output

Input/Output, as described in Chapter 20 of the Java book, is not as complicated as it looks. You can get pretty far just writing to System.out (which is of type PrintStream ) with methods print , println , and printf . The method print simply writes converts its argument to a String and writes it to the output stream. The method println is similar, but adds a newline so that following output starts on a new line. The method printf is new in Java 1.5. It expects a String as its first argument and zero or more additional arguments. Each '%' in the first argument indicates a request to print one of the other arguments. The details are spelled out by one or more characters following the '%'. For example,

    out.printf("pair(%d,%d)%n", pair.x, pair.y);

    out.println("pair(" + pair.x + "," + pair.y + ")");

For input, you probably want to wrap the standard input System.in in a BufferedReader , which provides the handy method readLine()

    BufferedReader input =
        new BufferedReader(new InputStreamReader(System.in));
    for(;;) {
        String line = input.readLine();
        if (line == null) {
            break;
        }
        // do something with the next line
    }

If you want to read from a file, rather than from the keyboard (standard input), you can use FileReader, probably wrapped in a BufferedReader.

    BufferedReader input =
        new BufferedReader(new FileReader("somefile"));
    for (;;) {
        String line = input.readLine();
        if (line == null) {
            break;
        }
        // do something with the next line
    }

Other Goodies

The library of pre-defined classes has several other handy tools. See the online manual , particularly java.lang and java.util for more details.

Integer, Character, etc.

    int i;
    Integer ii;
    ii = 3;     // Same as ii = new Integer(3);
    i = ii;     // Same as i = ii.intValue();

    int i = Integer.MAX_VALUE;          // 2147483648, the largest possible int
    int j = Integer.parseInt("123");    // the int value 123
    String s = Integer.toHexString(123);// "7b" (123 in hex)
    double x = Double.parseDouble("123e-2");
                                        // the double value 1.23
    Character.isDigit('3')              // true
    Character.isUpperCase('a')          // false
    Character.toUpperCase('a')          // 'A'

List

A List is like an array, but it grows as necessary to allow you to add as many elements as you like. The elements can be any kind of Object, but they cannot be primitive values such as integers. When you take objects out of a List, you have to use a cast to recover the original type. Use the method add(Object o) to add an object to the end of the list and get(int i) to remove the i^th element from the list. Use iterator() to get an Iterator for running through all the elements in order.³ List is an interface, not a class, so you cannot create a new list with new. Instead, you have to decide whether you want a LinkedList or an ArrayList. The two implementations have different preformance characteristics.

    List list = new ArrayList();     // an empty list
    for (int i = 0; i < 100; i++) {
        list.add(new Integer(i));
    }
    // now it contains 100 Integer objects

    // print their squares
    for (int i = 0; i < 100; i++) {
        Integer member = (Integer) list.get(i);
        int n = member.intValue();
        out.println(n*n);
    }

    // another way to do that
    for (Iterator i = list.iterator(); i.hasNext(); ) {
        int n = ((Integer) i.next()).intValue();
        out.println(n*n);
    }
    list.set(5, "hello");        // like list[5] = "hello"
    Object o = list.get(3);      // like o = list[3];
    list.add(6, "world");        // set list[6] = "world" after first shifting
                                 // element list[7], list[8], ... to the right
                                 // to make room
    list.remove(3);              // remove list[3] and shift list[4], ... to the
                                 // left to fill in the gap

    list.add(new Integer(47));
        // or list.add(47), using Java 1.5 autoboxing
    sum += ((Integer) list.get(i)).intValue();

Don't forget to import java.util.List; import java.util.ArrayList; or import java.util.*; .

Lists and other similar classes are even easier to use with the introduction of generic types in Java 1.5. Instead of List l which declares l to be a list of Objects of unspecified type, use List, read as "List of Integer". When you add an object list l, the compiler checks that the object is of type Integer or a subclass of Integer and gives a compile-time error if not, and the expression l.get(3) has type Integer, not Object eliminating the need for a cast. Using generic types, autoboxing and the new "foreach" loop also introduced in Java 1.5, the previous example becomes much simpler.

    List<Integer> list = new ArrayList<Integer>();     // an empty list
    for (int i = 0; i < 100; i++) {
        list.add(i);
    }
    // now it contains 100 Integer objects

    // print their squares
    for (Iterator<Integer> i = list.iterator(); i.hasNext(); ) {
        int n = i.next();
        out.println(n*n);
    }
    // or even simpler
    for (int n : list) {
        out.println(n*n);
    }

    List<String> strList = new ArrayList<String>();
    for (int i = 0; i < 100; i++) {
        strList.add("value " + i);
    }
    strList.set(5, "hello");   // like strList[5] = "hello"
    String s = strList.get(3); // like o = strList[3];
    strList.add(6, "world");   // set strList[6] = "world" after first shifting
                               // element strList[7], strList[8], ... to the
                               // right to make room
    strList.remove(3);         // remove strList[3] and shift strList[4], ... to
                               // the left to fill in the gap

Maps and Sets

The interface Map⁴ represents a table mapping keys to values. It is sort of like an array or List, except that the "subscripts" can be any objects, rather than non-negative integers. Since Map is an interface rather than a class you cannot create instances of it, but you can create instances of the class HashMap, which implements Map using a hash table or TreeMap which implements it as a binary search tree (a "red/black" tree).

    Map<String,Integer> table           // a mapping from Strings to Integers
        = new HashMap<String,Integer>();
    table.put("seven", new Integer(7)); // key is the String "seven";
                                        //   value is an Integer object
    table.put("four", 4);               // similar, using autoboxing
    Object o = table.put("seven", 70);  // binds "seven" to a different object
                                        //   (a mistake?) and returns the
                                        //   previous value
    int n = ((Integer)o).intValue();
    out.printf("n = %d\n", n);          // prints 7
    n = table.put("seven", 7);          // fixes the mistake
    out.printf("n = %d\n", n);          // prints 70
    out.println(table.containsKey("seven"));
                                        // true
    out.println(table.containsKey("twelve"));
                                        // false

    // print out the contents of the table
    for (String key : table.keySet()) {
        out.printf("%s -> %d\n", key, table.get(key));
    }
    n = table.get("seven");           // get value bound to "seven"
    n = table.remove("seven");        // get binding and remove it
    out.println(table.containsKey("seven"));
                                      // false
    table.clear();                    // remove all bindings
    out.println(table.containsKey("four"));
                                      // false
    out.println(table.get("four"));   // null

    out.println("What are your favorite colors?");
    BufferedReader input =
        new BufferedReader(new InputStreamReader(in));
    Set<String> favorites = new HashSet<String>();
    try {
        for (;;) {
            String color = input.readLine();
            if (color == null) {
                break;
            }
            if (!favorites.add(color)) {
                out.println("you already told me that");
            }
        }
    } catch (IOException e) {
        e.printStackTrace();
    }
    int n = favorites.size();
    if (n == 1) {
        out.printf("your favorite color is");
    } else {
        out.printf("your %d favorite colors are:", n);
    }
    for (String s : favorites) {
        out.printf(" %s", s);
    }
    out.println();

StringTokenizer

A StringTokenizer is handy in breaking up a string into words separated by white space (or other separator characters). The following example is from the Java book:

    String str = "Gone, and forgotten";
    StringTokenizer tokens = new StringTokenizer(str, " ,");
    while (tokens.hasMoreTokens())
        System.out.println(tokens.nextToken());

    Gone
    and
    forgotten

There is a much more complicated class StreamTokenizer for breaking up an input stream into tokens. Many of its features seem to be designed to aid in parsing the Java language itself (which is not a surprise, considering that the Java compiler is written in Java).

Other Utilities

See Chapters 16 and 17 of the Java book for information about other handy classes.

¹All the members of an Interface are implicitly public. You can explicitly declare them to be public, but you don't have to, and you shouldn't.

²In particular, it won't necessarily be the one that has been sleeping the longest.

³Interface Iterator was introduced with Java 1.2. It is a somewhat more convenient version of the older interface Enumeration discussed earlier.

⁴Interfaces Map and Set were introduced with Java 1.2. Earlier versions of the API contained only Hashtable, which is similar to HashMap.