!IES Print Server
The IP address for iespserv is 144.92.235.29
----
The print server in room 21 is probably the most flakey of them all.  It was upgraded from a 200mhz dell to an 800 mhz dell in 2006. 

The printers hooked up to it are an HP Laserjet 2100 and a Dell Color Laser 5000n.
----
!Printer Setup
The dell printer plugs in with USB and the HP plugs in with a parallel port. 
The printers should both have the correct drivers installed which you can download off the manufacturers websites. 
They should both be installed twice;  once as holding queues and once as release queues
!Hold Queues
*The hold queues need to have short, one word share names so they can work with UNIX. 
*The hold queues should have their ports set as LPT1, even if they are USB.
*The hold queues should be paused and the the owner should be user "root"
*The administrator should only be able to print to the hold queues, not change any settings
*The hold queues should be shared
*Advanced printing services should be turned off and the printer should wait to spool before sending job.
!Release Queues
*The release queues should not be shared (or if they are they should be secured from "administrator" access
*Otherwise, the release queues should print normally. 

----
See also ([Mac Printing|?page=mac_printing])