8.3 Development Release Series 7.7

This is the development release series of Condor. The details of each version are described below.

Version 7.7.5

Release Notes:

• Condor version 7.7.5 not yet released.

New Features:

• A new command condor_drain may be used to control the draining of an execute machine. While a machine is draining, no new jobs may start. Once draining is complete, it enters the Drained/Idle state. For more details, see page . (Ticket #2330).

• A new daemon condor_defrag has been added to automate a simple policy for draining machines. For more details, see page . (Ticket #2330).

• condor_q -run now displays the value of the job ClassAd attribute EC2RemoteVirtualMachineName instead of [????????????????], under the HOST(S) column for grid type ec2 jobs. (Ticket #2599).

• Condor can now submit jobs to Grid Engine via the new sge grid-type. (Ticket #1984).

• Added the new "halt file" feature as a second way to suspend a running DAG. See section 2.10.6 for details. (Ticket #2213).

• Improved logging in more cases when Condor daemons run out of memory. (Ticket #2559).

• Improved verbose logging when D_MACHINE is enabled in NEGOTIATOR_DEBUG. Previously, it logged whether each candidate machine matched or did not match with each job. Now, it additionally logs whether the match was subsequently rejected for other reasons, such as insufficient priority, rank, or fair share allocation.

Configuration Variable and ClassAd Attribute Additions and Changes:

• The new configuration variable JOB_QUEUE_LOG specifies an alternative path and file name for the job_queue.log file. The default value is $(SPOOL)/job_queue.log. This alternative location can be useful if there is a solid state drive which is big enough to hold the frequently written to job_queue.log, but not big enough to hold the whole contents of the spool directory. (Ticket #2598).

Bugs Fixed:

• Communication errors were not always correctly handled when fetching results of a query when using the -stream option to condor_q. This problem was introduced in 7.7.0. (Ticket #2601).

• Fixed Condor's CronTab (Crondor, section 2.12.2) scheduling of jobs, as they did not correctly take into account shifts in time caused by daylight savings time transitions. (Ticket #2620).

• condor_ssh_to_job sessions inherited the condor_starter environment. Now, this only happens when JOB_INHERITS_STARTER_ENVIRONMENT is True.

• In Linux, the memory usage was ignored for job sub-processes that were created via fork() without calling exec(). This problem affected ImageSize and ResidentSetSize but not ProportionalSetSize.

• Fixed a rare condition that could cause a job to remain in the running state indefinitely when the job was removed or put on hold and there was a communication failure between the condor_shadow and the condor_starter. This problem was introduced in 7.7.2. (Ticket #2591).

• Fixed a bug in the condor_gridmanager that could cause crashes and prevent the x509UserProxyEmail from being set properly for jobs forwarded via Condor-C. (Ticket #2655).

Known Bugs:

• None.

Additions and Changes to the Manual:

• None.

Version 7.7.4

Release Notes:

• Condor version 7.7.4 not yet released.

New Features:

• Condor version 7.7.4 has all of the features and fixes of Condor 7.7.3, with one major addition. This is the ability to run in a pure ipv6 network. This is disabled by default. To enable this code, set the config file parameter ENABLE_IPV6 to true. Note that running in a mixed ipv6 and ipv4 environment has not been tested, and is not supported.

Configuration Variable and ClassAd Attribute Additions and Changes:

• None.

Bugs Fixed:

• None.

Known Bugs:

• None.

Additions and Changes to the Manual:

• None.

Version 7.7.3

Release Notes:

• Condor version 7.7.3 not yet released.

• On Linux and Mac OS X, the Condor binaries now dynamically link with libcondor_utils, a shared library that contains all Condor code that is used by multiple binaries. This library is not meant to be linked with user applications. (Ticket #2132).

• Condor now dynamically links with the ClassAds, Globus and VOMS libraries on Mac OS X. A copy of these libraries is included with Condor. (Ticket #2482).

New Features:

• In Condor version 7.7.2, multiple Condor installations led to the possibility for some installations to use the wrong version of the ClassAds library. This should no longer be an issue, as the binaries now use RUNPATH instead of RPATH, allowing use of the LD_LIBRARY_PATH environment variable to set where to look for the shared libraries. (Ticket #2539).

• The Amazon SOAP interface is no longer present or supported in Condor. The EC2 REST interface is favored and supported in Condor using a grid_resource of ec2. (Ticket #2523).

• The new condor_gather_info tool introduced in Condor version 7.5.6 has been updated and enhanced. It collects data about a Condor installation, and, if desired, about a specific job. This information is useful to Condor developers to help debug problems in a pool or with a job. (Ticket #1664). (Ticket #2372).

• The condor_userprio tool supports two new command line options. The -grouporder flag displays submitter entries for accounting groups at top of the list, in breadth-first order by group hierarchy. The -grouprollup flag reports accounting statistics for groups as summed at a level within the group hierarchy. (Ticket #1926).

• The condor_collector now avoids the performance problems caused previously when clients initiated communication with the condor_collector, but then delayed sending input. (Ticket #2506).

• When using versions of glexec that create a copy of the proxy for use by the job, Condor now ensures that this copy of the proxy is cleaned up when the job is done. (Ticket #2501).

• The condor_startd now logs a clear message, if it rejects a job because no valid condor_starter daemons were detected. (Ticket #2470).

• The new submit command want_graceful_removal may be used to specify that a job being removed or put on hold should be shut down gracefully, rather than being immediately hard-killed. This allows the job to perform some final actions such as cleaning up or saving state. The usual policies governing the Preempting/Vacating state apply in this case.

  This new submit command replaces a different mechanism that was added in Condor version 7.5.2 to achieve some of the same effects. The version 7.5.2 mechanism applied to vanilla jobs under Linux; if the job set remove_kill_sig or kill_sig, the hard-kill signal that Condor would normally send to end the job was replaced with the signal specified by the user.

  With the new submit command, the version 7.5.2 mechanism is no longer used. The soft-kill signal may still be customized using kill_sig, so a similar effect can be achieved by setting want_graceful_removal=True and setting kill_sig to an alternative signal, if desired. The new mechanism works on all platforms and works for all universes in which the job is managed by the condor_startd; as such the new mechanism is not supported in the grid, local, or scheduler universes.

  In addition, the new submit command job_max_vacate_time replaces the kill_sig_timeout command. job_max_vacate_time adjusts the time given to an evicted job for gracefully shutting down. (Ticket #2536).

• The condor_master now logs a more informative error message when it fails to start a daemon. (Ticket #2580).

• The condor_schedd daemon now logs a more informative error message when it rejects job ClassAd updates from the condor_shadow due to authorization problems. (Ticket #2581).

Configuration Variable and ClassAd Attribute Additions and Changes:

• The new configuration variable MachineMaxVacateTime is now used to express the maximum time in seconds that the machine is willing to wait for a job to gracefully shut down. The default is 600 seconds (10 minutes). The boolean KILL expression was previously used to terminate the graceful shutdown of jobs. It should normally be set to False now. If desired, it may be used to abort the graceful shutdown of the job earlier than MachineMaxVacateTime. (Ticket #2536).

• The new configuration variable NEGOTIATOR_SLOT_CONSTRAINT defines an expression which constrains which ClassAds are fetched by the condor_negotiator from the condor_collector for the negotiation cycle. (Ticket #2277).

• The new configuration variable NEGOTIATOR_SLOT_POOLSIZE_CONSTRAINT replaces GROUP_DYNAMIC_MACH_CONSTRAINT . GROUP_DYNAMIC_MACH_CONSTRAINT may still be used, but a warning is written to the log, identifying that the configuration needs to be updated to use the new name. The pool size resulting from applying this constraint is used to determine quotas for both dynamic quotas in hierarchical groups, and when there are no groups. (Ticket #2277).

• The configuration variable NEGOTIATOR_STARTD_CONSTRAINT_REMOVE was introduced in Condor version 7.7.1. It has now been removed, as its functionality was made obsolete by NEGOTIATOR_SLOT_CONSTRAINT. (Ticket #2277).

• The configuration variables IGNORE_NFS_LOCK_ERRORS and BIND_ALL_INTERFACES no longer support the undocumented use of 'Y' or 'y' to mean True.

Bugs Fixed:

• Fixed a bug from Condor version 7.7.1 that caused submit description file commands using a substitution macro, $$(), to not work correctly when a condor_shadow daemon is recycled, as it is when the configuration variable SHADOW_WORKLIFE is set to a non-zero value. (Ticket #2552).

• When the condor_procd's named command pipe is removed, or when the inode of the pipe has been changed while the daemon is running, the condor_procd will now exit. Its previous behavior had the condor_procd continue to execute in a useless mode of operation, unable to receive any communication. (Ticket #2500).

• For Mac OS X platforms, improper detection of a non existent process led to lines such as

  ProcAPI sanity failure on pid 1317, age = -1901476270
  

  appearing in the condor_master daemon log. This should no longer be the case. (Ticket #2594).

• Fixed a bug introduced with hierarchical group quotas that failed to correctly initialize table entries. The fix adds logic to the accounting mechanism in the condor_negotiator daemon, such that initialization occurs correctly when starting up and upon reconfiguration. (Ticket #2509).

• When condor_advertise is used with the -tcp option, this used to cause the following log message to appear in the condor_collector log:

  DaemonCore: Can't receive command request from IP (perhaps a timeout?)
  

  (Ticket #2483).

• Fixed a bug introduced in Condor version 7.7.0, in which the setting of NETWORK_INTERFACE did not have any effect. (Ticket #2513).

• glexec now also works when Condor is running as root. (Ticket #2503).

• The condor_master daemon now successfully advertises itself in a Personal Condor installation, when the condor_collector is configured to use port 0 and to operate through a shared port. (Ticket #2555).

• Since Condor version 7.7.1, the configuration variable WANT_HOLD did not work, unless WANT_HOLD_SUBCODE was set to a non-zero value. (Ticket #2565).

• Since Condor version 7.7.2, there was a rare condition that could cause a job to be removed from the queue, if the job was put on hold while it was running. In such cases, there was also a spurious unsuspend event logged in the job's user log. (Ticket #2577).

• Fixed a bug introduced in Condor version 7.7.2 by the change of OpSys to "WINDOWS". Submit description files that used old syntax for the environment command were using Unix syntax rather than Windows syntax. (Ticket #2607).

• Fixed the linking of Kerberos libraries on RHEL 3. The bug could cause the Condor binaries to fail on some systems with the error:

  relocation error: /usr/kerberos/lib/libgssapi_krb5.so.2: 
  undefined symbol: krb5int_enc_arcfour
  

  (Ticket #2627).

Known Bugs:

• None.

Additions and Changes to the Manual:

• None.

Version 7.7.2

Release Notes:

• Condor version 7.7.2 released on October 11, 2011. This release contains all features and bug fixes from Condor version 7.6.4 as are currently documented (section 8.4) in this manual.

• Condor now dynamically links with the ClassAds, Globus and VOMS libraries on linux. A copy of these libraries is included with Condor, under lib/condor/ in the tarball releases and under /usr/lib/condor/ or /yrs/lib64/condor/ in the native package releases. (Ticket #2389). (Ticket #2390).

New Features:

• Condor's standard universe now supports reading from and writing to files that are larger than 2 GBytes, when the standard universe application and the condor_shadow daemon are both 64-bit executables. (Ticket #2337).

• There is command line support to both suspend and continue jobs. The new tools condor_suspend and condor_continue will suspend and continue running jobs. (Ticket #2368).

• The EC2 GAHP now supports X.509 for connecting to and authenticating with EC2 services. See section 5.3.8 for details on using the X.509 protocol. (Ticket #2084).

• Previously, the dedicated scheduler attempted to change the Scheduler attribute on all parallel job processes in a durable fashion, resulting in an fsync() for each process. This has been changed to be not durable, thereby improving the scalability by reducing the number of fsync() calls without impacting correctness. (Ticket #2367).

• In PrivSep mode, when an error is encountered when trying to switch to the user account chosen for running the job, the error message has been improved to make debugging easier. Now, the error message distinguishes between safety check failures for the UID, tracking group ID, primary group ID, and supplementary group IDs. (Ticket #2364).

• The name of the user used to execute the job is now logged in the condor_starter log, except when using glexec. (Ticket #2268).

• condor_dagman now defaults to writing a partial DAG file for a Rescue DAG, as opposed to a full DAG file. The Rescue DAG file is parsed in combination with the original DAG file, meaning that any changes to the original DAG input file take effect when running a Rescue DAG. (Ticket #2165).

• The behavior of DAGMan is changed, such that, by default, POST scripts will be run regardless of the return value from the PRE script of the same node as described in section 2.10.2. The previous behavior of not running the POST script can be restored by either adding the -AlwaysRunPost option to the condor_submit_dag command line, or by setting the new configuration variable DAGMAN_ALWAYS_RUN_POST to False, as defined at 3.3.26. (Ticket #2057).

• DAGMan will now copy PRIORITY values from the DAG input file to the JobPrio attribute in the job ClassAd. Furthermore, the PRIORITY values are propagated to child nodes and SUBDAGs, so that child nodes always have priority at least that of the maximum of the priorities of its parents. This has been a cause of confusion for DAGMan users. (Ticket #2167).

• A matchmaking optimization has significantly improved the speed of matching, when there are machines with many slots. (Ticket #2403).

• When the condor_schedd is starting up and it encounters corruption in its job transaction log, the error message in the log file now reports the offset within the file at which the error occurred. (Ticket #2450).

Configuration Variable and ClassAd Attribute Additions and Changes:

• The new job ClassAd attribute PreserveRelativeExecutable, when True prevents the condor_starter from prepending Iwd to the command executable Cmd, when Cmd is a relative path name and TransferExecutable is False. (Ticket #2460).

• Attributes have been added to all daemons to publish statistics about the the number of timers, signals, socket, and pipe messages that have been handled, as well as the amount of time spent handling them. Statistics attributes for DaemonCore have names that begin with DC or RecentDC. (Ticket #2354).

• The default value of OpSys on Windows machines has been changed to "WINDOWS", and a new attribute OpSysVer has been added that contains the version number of the operating system. This behavior is controlled by a new configuration variable ENABLE_VERSIONED_OPSYS which defaults to False on Windows and to True on other platforms. The new machine ClassAd attribute OpSys_And_Ver will always contain the versioned operating system. Note that this change could cause problems with mixed pools, because Condor version 7.7.2 condor_submit may add OpSys="WINDOWS", but machines running Condor versions prior to 7.7.2 will be publishing a versioned OpSys value, unless there is an override in the configuration. (Ticket #2366).

• Configuration variable COLLECTOR_ADDRESS_FILE is now set in the example configuration, similar to MASTER_ADDRESS_FILE. This configuration variable is required when COLLECTOR_HOST has the port set to 0, which means to select any available port. In other environments, it should have no visible impact. (Ticket #2375).

• Attributes have been added to the condor_schedd to publish aggregate statistics about jobs that are running and have completed, as well as counts of various failures. (Ticket #2197).

• The new configuration variable DAGMAN_WRITE_PARTIAL_RESCUE enables the new feature of writing a partial DAG file, instead of a full DAG input file, as a Rescue DAG. See section 3.3.26 for a definition. Also, the configuration variable DAGMAN_OLD_RESCUE no longer exists, as it is incompatible with the implementation of partial Rescue DAGs. (Ticket #2165).

Bugs Fixed:

• Fixed a bug introduced in Condor version 7.7.1, in the standard universe, where the getdirentries() call failed during remote I/O situations. (Ticket #2467).

• Fixed a bug in the condor_startd that was preventing dynamic slots from being properly instantiated from partitionable slots. (Ticket #2507).

• Fixed a bug introduced in Condor version 7.7.0, in which the condor_startd may erroneously report Can't find hostname of client machine. In cases where Condor was unable to identify the host name, the ClientMachine attribute in the machine ClassAd would have gone unset. (Ticket #2382).

• Fixed a bug existing since April 2001, in which on start up of the condor_schedd, with parallel universe jobs, the job queue sanity checking code would change the Scheduler attribute on jobs, only to have the attribute changed later by the dedicated scheduler. (Ticket #2367).

• Machine ClassAds with the Offline attribute set to True, and with neither MyType nor TargetType attributes defined caused the condor_collector to fail to start when it was next restarted. (Ticket #2417).

• Fixed a file descriptor leak in the EC2 GAHP, which would cause grid-type ec2 jobs to become held. The HoldReason for most such jobs would be Unable to read from accesskey file. (Ticket #2447).

• Fixed a bug that could cause a job's standard output and error to be written to the wrong location when should_transfer_files was set to IF_NEEDED, and the job runs on the machine where file transfer is not needed. If the standard output or error file names contained any path information, the output would be written to _condor_stdout or _condor_stderr in the job's initial working directory. (Ticket #1811).

• Fixed a bug introduced in Condor version 7.7.1 that could cause the condor_schedd daemon to crash after failing to expand a $$ macro in the job ClassAd. (Ticket #2491).

Known Bugs:

• In Condor version 7.7.2, the Condor daemons on Linux platforms rely on shared libraries. A bug in Condor version 7.7.1 and all previous versions of Condor prevents a 7.7.1 condor_master from starting 7.7.2 or later daemons. This also means that a 7.7.1 condor_master cannot upgrade itself to version 7.7.2. If a 7.7.1 condor_master binary is replaced with a 7.7.2 condor_master binary, Condor will shut off, and need to be restarted by hand.

Additions and Changes to the Manual:

• None.

Version 7.7.1

Release Notes:

• Condor version 7.7.1 released on September 12, 2011. This developer release contains all bug fixes from Condor version 7.6.3.

New Features:

• Condor now dynamically links with the OpenSSL and Kerberos security libraries, and Condor will use the operating system's version of these libraries, when they are available. The tarball release of Condor on Linux platforms includes a copy of these libraries. If the operating system's version is incompatible with Condor, Condor will use its own copy instead. Condor's copy of these libraries is located under lib/condor/. To prevent Condor from considering using them, delete these libraries. (Ticket #1874).

• The ClassAd language now has an unparse() function. It converts an expression into a string, which is handy with the new eval() function. (Ticket #1613).

• The new job ClassAd attribute KeepClaimIdle is defined with an integer number of seconds in the job submit description file, as the example:

    +KeepClaimIdle = 300
  

  If set, then when the job exits, if there are no other jobs immediately ready to run for this user, the condor_schedd daemon, instead of relinquishing the claim back to the condor_negotiator, will keep the claim for the specified number of seconds. This is useful if another job will be arriving soon, which can happen with linear DAGs. The condor_startd slot will go to the Claimed Idle state for at least that many seconds until either a new job arrives or the timeout occurs. See page , the unnumbered Appendix A for a complete definition of this job ClassAd attribute. (Ticket #2094).

• The new PRE_SKIP key word in DAGMan changes the behavior of DAG node execution such that the node's job and POST script may be skipped based on the exit value of the PRE script. See section 2.10.2 for details. (Ticket #2122).

Configuration Variable and ClassAd Attribute Additions and Changes:

• The new configuration variable NEGOTIATOR_STARTD_CONSTRAINT_REMOVE defaults to False. When True, any ClassAds not satisfying the expression in GROUP_DYNAMIC_MACH_CONSTRAINT are removed from the list of condor_startd ClassAds considered for negotiation. (Ticket #2232).

• The new configuration variable NEGOTIATOR_UPDATE_AFTER_CYCLE defaults to False. When True, it forces the condor_negotiator daemon to update the negotiator ClassAd in the condor_collector daemon at the end of every negotiation cycle. This is handy for monitoring and debugging activities. (Ticket #2373).

Bugs Fixed:

• Expressions for periodic policies such as PERIODIC_HOLD and PERIODIC_RELEASE could inadvertently cause a claim to be released, if the condor_shadow exited before waiting for final update from the condor_starter. (Ticket #2329).

• condor_submit previously could incorrectly detect references in the requirements expression to special attributes such as Memory when the name of the attribute happened to appear in a string literal or as part of the name of some other attribute. The detection of references to various special attributes influences the automatic requirements which are appended to the job requirements. (Ticket #2350).

• In rare cases, CCB requests could cause the server to hang for 20 seconds while waiting for all of the request to arrive. (Ticket #2360).

Known Bugs:

• None.

Additions and Changes to the Manual:

• None.

Version 7.7.0

Release Notes:

• Condor version 7.7.0 released on July 29, 2011. This developer release contains all bug fixes from Condor version 7.6.2.

New Features:

• A full port of Condor is available for RedHat Enterprise Linux 6 on the x86_64 processor. A full port includes support for the standard universe.

• The matchmaking attributes SubmitterUserResourcesInUse and RemoteUserResourcesInUse are now biased by slot weights.

• condor_submit now accepts the new command line option -addr, naming the IP address of the condor_schedd to submit to.

• The condor_vm_gahp now is dynamically linked to libvirt. We believe this makes it more portable.

• Programs condor_reconfig_schedd and condor_master_off are no longer part of the distribution. These programs were replaced many years ago by the more general condor_reconfig and condor_off commands.

• On Windows platforms, improved the ability of the condor_starter and condor_shadow daemons to clean up the execute directory, if jobs have changed the ACLs or permissions on files they have created.

• condor_submit now sets a default value for job ClassAd attribute RequestMemory.

• The submission performance of cream grid jobs has been substantially improved by batching submit requests.

• condor_q -better now has cleaner output, and informs the user when negotiation has not yet occurred.

• Implemented many improvements to the Condor init scripts.

• Deltacloud support has been updated to deltacloud version 0.8.

• As of Condor version 7.6.0, vm universe submit description files no longer support automatic creation of cdrom images from text input file. Users must now explicitly create ISO images and transfer them with the job.

• condor_q now supports the new option -stream-results. When this option is specified, condor_q displays results as they are fetched from the job queue, rather than buffering up the query results before displaying anything.

• The new submit description file command stack_size applies to Linux jobs that are not running in the standard universe. It sets the allocation of stack space to be other than the default value, which is unlimited. It also advertises the job ClassAd attribute StackSize.

• The new ClassAd function stringListsIntersect evaluates to True if two strings of delimited elements have any matching elements, and it evaluates to False otherwise.

• The grid universe now supports the ec2 resource type, which uses the EC2 Query (REST) API to start virtual machines on cloud resources.

• The behavior of DAGMan has changed, such that if multiple definitions of a VARS macroname for a specific node within a DAG input exist, a warning is written to the log, of the format

  Warning: VAR <macroname> is already defined in job <JobName>
  Discovered at file "<DAG input file name>", line <line number>
  

  See section 2.10.7 for details.

• The version number for ClassAds now matches the Condor version number.

• When glexec fails to execute a job, diagnostic error messages produced by glexec used to be discarded. These error messages are now displayed in the log of the condor_starter and in the job's hold reason.

• New submit description file commands periodic_hold_reason, periodic_hold_subcode, on_exit_hold_reason, and on_exit_hold_subcode permit the job to set a hold reason string and subcode number. Similarly, the system job policy can specify the reason and subcode using SYSTEM_PERIODIC_HOLD_REASON and SYSTEM_PERIODIC_HOLD_SUBCODE . In addition, the condor_hold command now accepts a -subcode option, which is used to set the job attribute HoldReasonSubCode.

• If the condor_shadow cannot write to the user log, the job is now put on hold.

Configuration Variable and ClassAd Attribute Additions and Changes:

• The new configuration variable NEGOTIATOR_UPDATE_AFTER_CYCLE defaults to False. If set to True, it will force the condor_negotiator daemon to publish an update ClassAd to the condor_collector at the end of every negotiation cycle. This is useful if monitoring cycle-based statistics.

• The configuration variables for security DENY_CLIENT and HOSTDENY_CLIENT now also look for the prefixes TOOL and SUBMIT.

• CONDOR_VIEW_HOST is now a comma and/or white space separated list of hosts, in order to support more than one CondorView host.

• For a job with an X.509 proxy credential, the new job ClassAd attribute X509UserProxyEmail is the email address extracted from the proxy.

• On Linux execute machines with kernel version more recent than 2.6.27, the proportional set size (PSS) in Kbytes summed across all processes in the job is now reported in the attribute ProportionalSetSizeKb. If the execute machine does not support monitoring of PSS or PSS has not yet been measured, this attribute will be undefined. PSS differs from ImageSize in how memory shared between processes is accounted. The PSS for one process is the sum of that process' memory pages divided by the number of processes sharing each of the pages. ImageSize is the same, except there is no division by the number of processes sharing the pages.

• The new configuration variable DAGMAN_USE_STRICT turns warnings into errors, as defined in section 3.3.26.

• The condor_schedd now publishes performance-related statistics. Page  in Appendix A contains definitions for these new attributes:
  • DetectedMemory
  • DetectedCpus
  • UpdateInterval
  • WindowedStatWidth
  • ExitCode<N>
  • ExitCodeCumulative<N>
  • JobsSubmitted
  • JobsSubmittedCumulative
  • JobsStarted
  • JobsStartedCumulative
  • JobsCompleted
  • JobsCompletedCumulative
  • JobsExited
  • JobsExitedCumulative
  • ShadowExceptions
  • ShadowExceptionsCumulative
  • JobSubmissionRate
  • JobStartRate
  • JobCompletionRate
  • MeanTimeToStart
  • MeanTimeToStartCumulative
  • MeanRunningTime
  • MeanRunningTimeCumulative
  • SumTimeToStartCumulative
  • SumRunningTimeCumulative

• For Windows platforms, the condor_startd now publishes the ClassAd attribute DotNetVersions, containing a comma separated list of installed .NET versions.

Bugs Fixed:

• Fixed a bug in which the condor_startd daemon can get stuck in a loop trying to execute an invalid, that is non-existent, Daemon ClassAd Hook job.

• Fixed bug that would cause the condor_startd daemon to incorrectly report Benchmarking activity instead of Idle activity, when there is a problem launching the benchmarking programs.

• On Windows only, fixed a rare bug that could cause a sporadic access violation when a Condor daemon spawned another process.

• Fixed a bug introduced in Condor version 7.5.5, which caused the condor_schedd to die managing parallel jobs.

• The condor_startd daemon now looks up the condor_kbdd daemon address on every update. This fixed problems if the condor_kbdd daemon is restarted during the condor_startd lifespan.

• Fixed bug in condor_hold that happened if the hold reason contained a double quote character.

• Fixed a bug introduced in Condor version 7.5.6 that caused any Daemon ClassAd hook job with non-empty value for STARTD_CRON_<JobName>_ARGS, SCHEDD_CRON_<JobName>_ARGS or BENCHMARKS_<JobName>_ARGS to fail. Also, the specification of STARTD_CRON_<JobName>_ENV, SCHEDD_CRON_<JobName>_ENV, or BENCHMARKS_<JobName>_ENV for these jobs was ignored.

• Fixed bug in the RPM init script. A status request would always report Condor as inactive, and a shutdown request would not report failure if there was a timeout shutting down Condor.

• File transfer plug-ins now have a correctly set environment.

• Fixed a problem with detecting IBM Java Virtual Machines whose version strings have embedded newline characters.

• condor_q -analyze now works with ClassAd built-in functions.

• Fixed bug in condor_q -run, such that it displays the host name correctly for local and scheduler universe jobs.

• Standalone checkpointing now works with compressed checkpoints again. This had been broken in Condor version 7.5.4.

• On Windows, net stop condor would sometimes cause the condor_master daemon to crash. This is now fixed.

• JobUniverse was effectively a required attribute for jobs created via the Fetch Work hook, due to the need to set the IS_VALID_CHECKPOINT_PLATFORM expression, such that it would not evaluate to Undefined. Now the default IS_VALID_CHECKPOINT_PLATFORM expression evaluates to True when JobUniverse is not defined.

• When there are multiple cpus but only one slot, the slot name no longer begins with slot1@.

• The tool condor_advertise seemed to be trying too hard to resolve host names. This was fixed to only do the minimally necessary number of look ups.

Known Bugs:

• None.

Additions and Changes to the Manual:

• None.