8.5 Development Release Series 7.5

This is the development release series of Condor. The details of each version are described below.

Version 7.5.6

Release Notes:

• Condor version 7.5.6 released on March 21, 2011.

• What used to be known as the condor_startd and condor_schedd cron mechanisms are now collectively called Daemon ClassAd Hooks. The significant changes in this Condor version 7.5.6 release are given in the New Features section.

• In the release directory, the subdirectory lib/glite/ has been moved to libexec/glite/.

• This development series of Condor is no longer officially released for the platforms PowerPC AIX, PowerPC-64 SLES 9, PowerPC MacOS 10.4, Solaris 5.9 on all architectures, Solaris 5.10 on all architectures, Itanium IA64 RHEL 3, PS3 (PowerPC) YDL 5.0, and x86 Debian 4.

• Support for GCB has been removed.

• The default Unix Sys-V init script has been completely reworked. In addition to new features, this changes the following:
  • The default location of the Condor configuration file is now /etc/condor/condor_config. This location can be changed by editing the sysconfig file or the init script itself.
  • The default location of the Condor installation is now /usr/, with binaries in /usr/bin and /usr/sbin. These locations can also be changed by editing the sysconfig file or the init script itself.

New Features:

• Condor no longer relies on DNS to determine its IP address. Instead, it examines the list of system network devices.

• condor_dagman now gives a warning if a node category has no nodes assigned to it or no throttle set.

• condor_dagman now has a $MAX_RETRIES macro for PRE and POST script arguments. Also, condor_dagman now prints a warning if an unrecognized macro is used for a PRE or POST script argument. See  for details.

• The condor_schedd is now more efficient in handling the exit of condor_shadow processes, when there are large numbers of condor_shadow processes.

• Condor's Chirp protocol has been updated with new commands. The Chirp C++ client and condor_chirp command are updated to use the new commands. See section 9 for details on the new commands.

• The Daemon ClassAd Hooks mechanism is described in section 4.4.3, with configuration variables defined in section 3.3.38. The mechanism has the following new features:
  • The condor_startd's benchmarks are no longer hard coded into the condor_startd. Instead, the benchmarks are now implemented via the Daemon ClassAd Hooks mechanism. Two new programs are shipped with Condor version 7.5.6: condor_mips and condor_kflops. These programs are in the libexec directory). They implement the original mips and kflops benchmarks for this new implementation. Additional benchmarks can now easily be implemented; the list of benchmarks is controlled via the new BENCHMARKS_JOBLIST configuration variable.

  • Several fixes to the the mips and kflops benchmarks should increase the reproducibility of their results.

  • Two new job types have been implemented in the Daemon ClassAd Hooks mechanism. They are called OneShot and OnDemand. Currently, OnDemand is used only by the new BENCHMARKS mechanism.

• condor_dagman now prints out all boolean configuration variable values as True or False, instead of 1 or 0 within the dagman.out file.

• Because of the new DAGMAN_VERBOSITY configuration setting (see section 3.3.26), the -debug flag is no longer propagated from a top-level DAG to a sub-DAG; furthermore, -debug is no longer set in a .condor.sub file unless it is set on the condor_submit_dag command line.

• When job ClassAd attributes are modified via condor_qedit, the changes are now propagated to the condor_shadow and condor_gridmanager. This allows a user's changes to the job ClassAd to affect the job policy expressions while the job is managed by these daemons.

• Several improvements for CREAM grid jobs:
  • CREAM commands are retried if the server closes the connection prematurely.
  • All jobs going to a CREAM server share the same lease handle.
  • Multiple CREAM status requests for single jobs are now batched into a single command to the server.
  • When there are too many commands to be issued to a CREAM server simultaneously, new job submissions have lower priority than commands operating on existing jobs.

• The new script condor_gather_info, located in bin/, creates reports with information from a Condor pool about a specific job ID. It also gathers some understanding of the pool under which it runs.

• Added support for hierarchical accounting groups and group quotas.

• condor_q -better-analyze now identifies jobs that have not yet been considered by matchmaking, instead of characterizing them as not matching for unknown reasons.

• The default Unix Sys-V init script has been completely reworked. The new version should now work on all Unix and Linux systems. Major features and changes in the new script:
  • Supports the use of a Linux-style sysconfig file
  • Supports the use of a Linux-style PID file
  • Supports the following commands:
    • start
    • stop
    • restart
    • try-restart
    • reload
    • force-reload
    • status
  • The default location of the Condor configuration file is now /etc/condor/condor_config. This location can be changed by editing the sysconfig file or the init script itself.
  • The default location of the Condor installation is now /usr/, with binaries in /usr/bin and /usr/sbin. These locations can be changed by editing the sysconfig file or the init script itself.

Configuration Variable and ClassAd Attribute Additions and Changes:

• The default value of configuration variable GLITE_LOCATION has changed to $(LIBEXEC)/glite. This reflects the change made in the layout of the Condor release files.

• Values for configuration variables NETWORK_INTERFACE and PRIVATE_NETWORK_INTERFACE may now specify a network device name or an IP address. The asterisk character (*) may be used as a wild card in either a name or IP address. This makes it easier to apply the same configuration to a large number of machines, because the IP address does not have to be customized for each host.

• The new configuration variable DELEGATE_JOB_GSI_CREDENTIALS_LIFETIME specifies the maximum number of seconds for which delegated job proxies should be valid. The default is one day. A value of 0 indicates that the delegated proxy should be valid for as long as allowed by the credential used to create the proxy; this was the behavior in previous releases of Condor. This configuration variable currently only applies to proxies delegated for non-grid jobs and Condor-C jobs. It does not currently apply to globus grid jobs. The job may override this configuration variable by using the delegate_job_GSI_credentials_lifetime submit description file command.

• The new configuration variable DELEGATE_JOB_GSI_CREDENTIALS_REFRESH specifies a floating point number between 0 and 1 that indicates when delegated credentials with limited lifetime should be renewed, as a fraction of the delegated lifetime. The default is 0.25.

• The new configuration variable SHADOW_CHECKPROXY_INTERVAL specifies the number of seconds between tests to see if the job proxy has been updated or should be refreshed. The default is 600 (10 minutes). Previously, the condor_shadow checked for proxy updates once per minute.

• Daemon ClassAd Hooks no longer support what was identified as the old syntax. Due to this, variables STARTD_CRON_JOBS and HAWKEYE_JOBS no longer exist. In previous versions of Condor, the condor_startd would issue a warning if this syntax was found, but, starting with 7.5.6, any use of these macros will be ignored.

• New configuration variables DAGMAN_VERBOSITY , DAGMAN_MAX_PRE_SCRIPTS , DAGMAN_MAX_POST_SCRIPTS , and DAGMAN_ALLOW_LOG_ERROR are defined in section 3.3.26.

• The new configuration variable STARTD_PUBLISH_WINREG can contain a list of Windows registry key names, whose values will be published in the condor_startd daemon's ClassAd.

• The new configuration variable CONDOR_VIEW_CLASSAD_TYPES is a string list that specifies the types of the ClassAds that will be forwarded to the location defined by CONDOR_VIEW_HOST. See the definition at section 3.3.16.

• Added a -local-name command line option to condor_config_val to inspect the values of attributes that use local names.

Bugs Fixed:

• Fixed a bug for parallel universe jobs, introduced in Condor version 7.5.5, where the condor_schedd would crash under certain conditions when a parallel job was removed or exited.

• Fixed a memory leak in the condor_quill daemon.

• Fixed a problem in Condor version 7.5.5 release, in which binaries used for the grid universe's pbs and lsf grid types were not marked as executable.

• Fixed a bug introduced in Condor version 7.5.5 that caused running vanilla, java, and vm universe jobs to leave the queue when held.

• A bug has been fixed that caused SOAP transactions in the condor_schedd daemon to result in a log message of the form

  Timer <X> not found
  

  This bug is not known to have produced any other undesired behaviors.

• The job ClassAd attribute JobLeaseDuration is now set appropriately when a Condor-C job is forwarded to a remote pool. Previously, a default value was not supplied, causing jobs to be unnecessarily killed if the submit and execute machines temporarily lost contact with each other.

• Fixed a bug that caused condor_dagman to sometimes falsely report that a cycle existed in a DAG.

• Using the condor_hold command on a Windows platform job managed by condor_dagman no longer removes the node job of the DAG. This behavior on Windows now matches the behavior on other platforms.

• Using the condor_hold command followed by the condor_remove command on a job managed by condor_dagman now removes node jobs of the DAG, rather than leaving them as orphans.

• A bug has been fixed in the condor_config_val program, which caused it to try to contact the condor_collector before printing usage information, if the command line was syntactically incorrect.

• A bug has been fixed that caused Condor daemons to crash in response to DNS look up failures when receiving connections. The crash occurred during authorization of the new connection. This problem was introduced in Condor version 7.5.4.

• Fixed a bug that caused condor_submit to silently ignore parts of attribute values if an equals sign was omitted.

• Starting in Condor version 7.5.5, the condor_schedd daemon would sometimes generate an error message and exit abnormally when shutting down. The error message contained the following text:

  ERROR ``Assertion ERROR on (m_ref_count == 0)''
  

• Changes to the condor_negotiator daemon's address were not published to the condor_collector until the condor_negotiator daemon was reconfigured or restarted. This was a problem in some situations when using condor_shared_port.

• A bug introduced in 7.5.5 resulted in failure to advance the flocking level due to lack of activity from one of the negotiators in the flocking list.

• Fixed a Windows-specific problem where the main daemon loop can get into a state where it is busy waiting.

• Fixed condor_schedd exception on shutdown caused by bad reference count.

• Releases of Condor with versions from 7.5.0 to 7.5.5 incorrectly implemented the macro language used for configuration with variables having LOCAL. at the prefix. This was a regression from the Condor 7.4 series. It is now fixed and the functionality has been restored.

Known Bugs:

• If a cycle exists in the set of jobs to be removed defined by the job ClassAd attribute OtherJobRemoveRequirements, removing any of the jobs in the set will cause the condor_schedd to go into an infinite loop. OtherJobRemoveRequirements is defined on page .

• In a condor_dagman workflow, if a splice contains nothing but another splice, parsing the DAG will fail. This can be worked around by putting any non-splice job, including a DAG-level NOOP job, into the offending splice. This bug has apparently existed since the splice feature was introduced in condor_dagman.

• If an individual Daemon ClassAd Hook manager is not named, the jobs under it will attempt to use incorrectly named configuration variables. For example, the following correct configuration will not work, because the Daemon ClassAd Hook manager will fail to look up the job's executable variable, given the error in configuration variable naming:

  STARTD_CRON_JOBLIST = TEST
  ...
  STARTD_CRON_TEST_MODE       = periodic
  STARTD_CRON_TEST_EXECUTABLE = $(LIBEXEC)/test
  ...
  

  Condor version 7.5.6 and all previous 7.x Condor versions will incorrectly name the variables from this example STARTD_TEST_MODE and STARTD_TEST_EXECUTABLE instead. If instead, the Daemon ClassAd Hook Manager had been named, using the no-longer-supported STARTD_CRON_NAME, the code works as expected. For example:

  STARTD_CRON_NAME = HAWKEYE
  HAWKEYE_JOBLIST  = TEST
  ...
  HAWKEYE_TEST_MODE       = periodic
  HAWKEYE_TEST_EXECUTABLE = $(LIBEXEC)/test
  ...
  

  This old behavior is, as of Condor version 7.5.6, documented as unsupported and is going away, primarily because it is confusing. But, for this release, it still works. It is believed that this same behavior exists in all 7.x releases of Condor, but because the naming feature is used, the incorrect behavior went undetected.

  This affects the STARTD_CRON and SCHEDD_CRON Daemon ClassAd Hook managers, and will be fixed in Condor version 7.6.0.

Additions and Changes to the Manual:

• None.

Version 7.5.5

Release Notes:

• Condor version 7.5.5 released on January 26, 2011.

• This version of Condor uses a different layout in the spool directory for storing files belonging to jobs that are in the queue. Conversion of the spool directory is automatic when upgrading, but be aware that downgrading to a previous version of Condor requires extra effort. The procedure for downgrading is either to drain all jobs with spooled files from the queue, or to manually convert the spool back to the older format. To manually convert back to the older format, stop Condor and back up the spool directory in case of problems. Then move all subdirectories matching the form $(SPOOL)/<#>/<#>/cluster<#>.proc<#>.subproc<#> into $(SPOOL). Also do this for any files of the form $(SPOOL)/<#>/cluster<#>.ickpt.subproc<#>. Edit $(SPOOL)/job_queue.log with a text editor, and change all references to the old paths to the new paths. Then, remove $(SPOOL)/spool_version. Finally, start up Condor.

• For those who compile Condor from the source code rather than using packages of pre-built executables, be aware that in this release Condor is built using cmake instead of imake. See the README.building file for the new instructions on how to build Condor.

• This release note serves to remind users that as of Condor version 7.5.1, the RPMs come with native packaging. Therefore, items are in different locations, as given by FHS locations, such as /usr/bin, /usr/sbin, /etc, and /var/log. Please see section 3.2.6 for installation documentation.

• Quill is now available only within the source code distribution of Condor. It is no longer included in the builds of Condor provided by UW, but it is available as a feature that can be enabled by those who compile Condor from the source code. Find the code within the condor_contrib directory, in the directories condor_tt and condor_dbmsd.

• The AIX 5.2 packages in this release have been found to be incompatible with AIX 5.3.

• We are planning to drop support for AIX. Please contact us if this is a problem for you.

• The directory structure within the Unix tar file package of Condor has changed. Previously, the tar file contained a top level directory named condor-<version>. The top level directory is now the same as the tar file name, but without the .tar.gz extension.

• On Unix platforms, the following executables used to be located in both the sbin and bin directories, but are now only located in the bin directory: condor, condor_checkpoint, condor_reschedule, and condor_vacate.

• The size of the Condor installation has increased by as much as 60% compared to Condor version 7.5.4. We hope to eliminate most of this increase in Condor version 7.5.6.

• Previously, packages containing debug symbols were available for many Unix platforms. In this release, the debug packages contain full, `unstripped' executables instead of just the debug symbols.

• The contents of the Windows zip and MSI packages of Condor have changed. The lib and libexec folders no longer exist, and all contents previously within them are now in bin. condor_setup and condor_set_acls have been moved from the top level directory into bin.

• The Windows MSI installer for Condor version 7.5.5 requires that all previous MSI installations of Condor be uninstalled. Before uninstalling previous versions, make backup copies of configuration files. Any settings that need to be preserved must be reapplied to the configuration of the new installation.

• The following list itemizes changes included in this Condor version 7.5.5 release that belong to Condor version 7.4.5. That stable series version will not yet have been released as this development version is released.
  • condor_dagman now prints a message in the dagman.out file whenever it truncates a node job user log file. condor_dagman now prints additional diagnostic information in the case of certain log file errors.

  • Fixed a bug in which a network disconnect between the submit machine and execute machine during the transfer of output files caused the condor_starter daemon to immediately give up, rather than waiting for the condor_shadow to reconnect. This problem was introduced in Condor version 7.4.4.

  • Fixed a bug in which if condor_ssh_to_job attempted to connect to a job while the job's input files were being transferred, this caused the file transfer to fail, which resulted in the job returning to the idle state in the queue.

  • In privsep mode, the transfer of output failed if a job's execute directory contained symbolic links to non-existent paths.

New Features:

• Negotiation is now handled asynchronously in the condor_schedd daemon. This means that the condor_schedd remains responsive during negotiation and is less prone to falling behind on communication with condor_shadow processes.

• Improved monitoring and avoidance of a lock convoy problem observed when there were more than 30,000 condor_shadow processes. At this scale, locking the condor_shadow daemon's log on each write to the log file has been observed on Linux platforms to sometimes result in a situation where the system does very little productive work, and is instead consumed by rapid context switching between the condor_shadow daemons that are waiting for the lock.

• On Linux platforms, if the condor_schedd daemon's spool directory is on an ext3 file system, Condor can now scale to a larger number of spooled jobs. Previously, Condor created two subdirectories within the spool directory for each spooled job and for each running job. The ext3 file system only supports 31,997 subdirectories. This effectively limited the number of spooled jobs to less than 16,000. Now, Condor creates a hierarchy of subdirectories within the spool directory, to increase the limit on the number of spooled jobs in ext3 to 320,000,000, which is likely to be larger than other limits on the size of the job queue, such as memory.

• The condor_shadow daemon uses less memory than it has since Condor version 7.5.0. Memory usage should now be similar to the 7.4 series.

• The condor_dagman and condor_submit_dag command-line flag -DumpRescue causes the dump of an incomplete Rescue DAG, when the parsing of the DAG input file fails. This may help in figuring out what went wrong. See section 2.10.8 for complete details on Rescue DAGs.

• condor_dagman now has the capability to create the jobstate.log file needed for the Pegasus workflow manager. See section 2.10.12 for details.

• condor_wait can now work on jobs with logs that are only readable by the user running condor_wait. Previously, write access to the job's user log was required.

• Added a new value for the job ClassAd attribute JobStatus. The TRANSFERRING_OUTPUT status is used when transferring a job's output files after the job has finished running. Jobs with this status will have their JobStatus attribute set to 6. The standard condor_q display will show the job's status as >.

Configuration Variable and ClassAd Attribute Additions and Changes:

• The new configuration variable LOCK_DEBUG_LOG_TO_APPEND controls whether a daemon's debug lock is used when appending to the log. When the default value of False, the debug lock is only used when rotating the log file. When True, the debug lock is used when writing to the log as well as when rotating the log file. See section 3.3.4 for the complete definition.

• The new configuration variable LOCAL_CONFIG_DIR_EXCLUDE_REGEXP may be set to a regular expression that specifies file names to ignore when looking for configuration files within the directories specified via LOCAL_CONFIG_DIR. See section 3.3.3 for the complete definition.

Bugs Fixed:

• In previous versions of Condor, the condor_starter could not write the .machine.ad and .job.ad files to the execute directory when PrivSep was enabled. This has now been fixed, and these files are correctly emitted in all cases.

• Since Condor version 7.5.2, the speed of condor_q was not as high as earlier 7.5 and 7.4 releases, especially when retrieving large numbers of jobs. Viewing 100K jobs took about four times longer. This release fixes the performance, making it about the same as before Condor version 7.5.2.

• A bug introduced in Condor version 7.5.4 prevented parallel universe jobs with multiple queue statements in the submit description file from working with condor_dagman. This is now fixed.

• Improved the way Condor daemons send heartbeat messages to their parent process. This resolves a problem observed on busy submit machines using the condor_shared_port daemon. The condor_master daemon sometimes incorrectly determined that the condor_schedd was hung, and would kill and restart it.

• When the configuration variable NOT_RESPONDING_WANT_CORE is True, the condor_master daemon now follows up with a SIGKILL, if the child process does not exit within ten minutes of receiving SIGABRT. This addresses observed cases in which the child process hangs while writing a core file.

• Host name-based authorization failed in Condor version 7.5.4 under Mac OS X 10.4, because look ups of the host name for incoming connections failed.

• A bug introduced in Condor version 7.5.0 caused the attributes MyType and TargetType in offline ClassAds to get set to "(unknown type)" when the offline ClassAd was matched to a job.

• condor_dagman now excepts in the case of certain log file errors, when continuing would be likely to put condor_dagman into an incorrect internal state.

• Fixed a bug that caused DAG node jobs to have their coredumpsize limit set according to the CREATE_CORE_FILES configuration variable, rather than the user's coredumpsize limit.

• Fixed a case introduced in Condor version 7.5.4 on Windows platforms, in which the following spurious log message was produced:

  SharedPortEndpoint: Destructor: Problem in thread shutdown notification: 0
  

• Since Condor version 7.4.1, Condor-C jobs submitted without file transfer enabled could fail with the following error in the condor_starter log:

  FileTransfer: DownloadFiles called on server side
  

• Fixed a memory leak caused by use of the ClassAd eval() function. This problem was introduced in Condor version 7.5.2.

• Fixed a bug that could cause the condor_negotiator daemon to crash when groups are configured with GROUP_QUOTA_DYNAMIC_<group_name>, or when GROUP_QUOTA_<group_name> is not defined to be something greater than 0.

• Fixed a bug that caused random characters to appear for the value of AuthMethods when logging with D_FULLDEBUG and D_SECURITY enabled. This problem was introduced in Condor version 7.5.3.

• Fixed a memory leak in the condor_schedd introduced in Condor version 7.5.4.

• Fixed a problem introduced in Condor version 7.5.4 that could cause the condor_schedd daemon to enter an infinite loop while in the process of shutting down. For the problem to happen, it was necessary for flocking to have been enabled.

• Configuration variable SCHEDD_QUERY_WORKERS was effectively ignored when condor_q authenticated itself to the condor_schedd. The query was always processed in the main condor_schedd process rather than in a sub-process. This problem has existed since before Condor version 7.0.0.

• Fixed a problem affecting jobs that store their output in the condor_schedd's spool directory. The problem affected jobs that include an empty directory in their list of output files to transfer. This problem was introduced in Condor version 7.5.4, when support for the transfer of directories was added.

• Fixed a problem affecting the condor_master daemon since Condor version 7.5.3. The condor_master daemon would crash if it was instructed to shut down a daemon that was not currently running, but which was waiting to be restarted.

• Fixed a bug in condor_submit that prevented the submission of multiple vm universe jobs in a single submit file.

• Fixed a bug in the condor_schedd that could cause it to temporarily under count the number of running local and scheduler universe jobs. In Condor version 7.5.4, this under counting could cause the daemon to crash.

• Fixed a bug that could cause the condor_gridmanager to crash if a GAHP server did not behave as expected on start up.

• Improved the hold reason reported in several failure cases for CREAM grid jobs.

• The KFlops attribute reported by

    condor_status -run -total
  

  could erroneously be reported as negative. This has been fixed.

• Since Condor version 7.5.4, the refreshing of the proxy for the job in the remote queue did not work in Condor-C. Therefore, if the original job proxy expired, the job was halted and put on hold, even if the proxy had been renewed on the submit machine.

Known Bugs:

• In Condor version 7.5.5, when a running job is put on hold, the job is removed from the job queue.

Additions and Changes to the Manual:

• None.

Version 7.5.4

Release Notes:

• Condor version 7.5.4 released on October 20, 2010.

• All of the bug fixes and features which are in Condor version 7.4.4 are in this 7.5.4 release.

• The release now contains all header files necessary to compile code that uses the job log reading and writing utilities contained in libcondorapi. Some headers were missing starting in Condor 7.5.1.

New Features:

• Concurrency limits now work with parallel universe jobs scheduled by the dedicated scheduler.

• Transfer of directories is now supported by transfer_input_files and transfer_output_files for non-grid universes and Condor-C. The auto-selection of output files, however, remains the same: new directories in the job's output sandbox are not automatically selected as outputs to be transferred.

• Paths other than simple file names with no directory information in transfer_output_files previously did not have well defined behavior. Now, paths are supported for non-grid universes and Condor-C. When a path to an output file or directory is specified, this specifies the path to the file on the execute side. On the submit side, the file is placed in the job's initial working directory and it is named using the base name of the original path. For example, path/to/output_file becomes output_file in the job's initial working directory. The name and path of the file that is written on the submit side may be modified by using transfer_output_remaps.

• The condor_shared_port daemon is now supported on Windows platforms.

• Jobs can now by submitted to multiple EC2 servers via the amazon grid type. The server's URL must be specified via the grid_resource submit description file command for each job. See section 5.3.8 for details.

• The grid universe's amazon grid type can now be used to submit virtual machine jobs to Eucalyptus systems via the EC2 interface.

• condor_q now uses the queue-management API's projection feature when used with -run, -hold, -goodput, -cputime, -currentrun, and -io options when called with no display options or with -format.

• Decreased the CPU utilization of condor_dagman when it is submitting ready jobs into Condor.

• condor_dagman now logs the number of queued jobs in the DAG that are on hold, as part of the DAG status message in the dagman.out file.

• condor_dagman now logs a note in the dagman.out file when the condor_submit_dag and condor_dagman versions differ, even if the difference is permissible.

• Added the capability for condor_dagman to create and periodically rewrite a file that lists the status of all nodes within a DAG. Alternatively, the file may be continually updated as the DAG runs. See section 2.10.11 for details.

• The condor_schedd daemon now uses a better algorithm for determining which flocking level is being negotiated. No special configuration is required for the new algorithm to work. In the past, the algorithm depended on DNS and the configuration variables NEGOTIATOR_HOST and FLOCK_NEGOTIATOR_HOSTS. In some networking environments, such as that of a multi-homed central manager, it was difficult to configure things correctly. When wrongly configured, negotiation would be aborted with the message, Unknown negotiator. The new algorithm is only used when the condor_negotiator is version 7.5.4 or newer. Of course, the condor_schedd daemon must still be configured to authorize the condor_negotiator daemon at the NEGOTIATOR authorization level.

• condor_advertise has a new option, -multiple, which allows multiple ClassAds to be published. This is more efficient than publishing each ClassAd in a separate invocation of condor_advertise.

• The condor_job_router is no longer restricted to routing only vanilla universe jobs. It also now automatically avoids recursively routing jobs.

• The condor_schedd now writes the submit event to the user job log. Previously, condor_submit wrote the event.

• The condor_schedd daemon now scales better when there are many job auto clusters.

• The condor_q command with option -run, -hold, -goodput, -cputime, -currentrun or -io is now much more efficient in its communication with the condor_schedd.

Configuration Variable and ClassAd Attribute Additions and Changes:

• The new configuration variable SOAP_SSL_SKIP_HOST_CHECK can be used to disable the standard check that a SOAP server's host name matches the host name in its X.509 certificate. This is useful when submitting grid type amazon jobs to Eucalyptus servers, which often have certificates with a host name of localhost.

• Added default values for <SUBSYS>_LOG configuration variables. If a <SUBSYS>_LOG configuration variable is not set in files condor_config or condor_config.local, it will default to $(LOG)/<SUBSYS>LOG.

• The new job ClassAd attribute CommittedSuspensionTime is a running total of the number of seconds the job has spent in suspension during time in which the job was not evicted without a checkpoint. This complements the existing attribute CumulativeSuspensionTime, which includes all time spent in suspension, regardless of job eviction.

• The new job ClassAd attributes CommittedSlotTime and CumulativeSlotTime are just like CommittedTime and RemoteWallClockTime respectively, except the new attributes are weighted by the SlotWeight of the machine(s) that ran the job.

• The new configuration variable SYSTEM_JOB_MACHINE_ATTRS specifies a list of machine attributes that should be recorded in the job ClassAd. The default attributes are Cpus and SlotWeight. When there are multiple run attempts, history of machine attributes from previous run attempts may be kept. The number of run attempts to store is specified by the new configuration variable SYSTEM_JOB_MACHINE_ATTRS_HISTORY_LENGTH , which defaults to 1. A machine attribute named X will be inserted into the job ClassAd as an attribute named MachineAttrX0. The previous value of this attribute will be named MachineAttrX1, the previous to that will be named MachineAttrX2, and so on, up to the specified history length. Additional attributes to record may be specified on a per-job basis by using the new job_machine_attrs submit file command. The history length may also be extended on a per-job basis by using the new submit file command job_machine_attrs_history_length.

• The new configuration variable NEGOTIATION_CYCLE_STATS_LENGTH specifies how many recent negotiation cycles should be included in the history that is published in the condor_negotiator's ClassAd. The default is 3. See page  for the definition of this configuration variable, and see page  for a list of attributes that are published.

• The configuration variable FLOCK_NEGOTIATOR_HOSTS is now optional. Previously, the condor_schedd daemon refused to flock without this setting. When this is not set, the addresses of the flocked condor_negotiator daemons are found by querying the flocked condor_collector daemons. Of course, the condor_schedd daemon must still be configured to authorize the condor_negotiator daemon at the NEGOTIATOR authorization level. Therefore, when using host-based security, FLOCK_NEGOTIATOR_HOSTS may still be useful as a macro for inserting the negotiator hosts into the relevant authorization lists.

• The configuration variable FLOCK_HOSTS is no longer used. For backward compatibility, this setting used to be treated as a default for FLOCK_COLLECTOR_HOSTS and FLOCK_NEGOTIATOR_HOSTS.

• The configuration variable AMAZON_EC2_URL is now only used for previously-submitted jobs when upgrading Condor to version 7.5.4 or beyond. New grid type amazon jobs must specify which EC2 service to use by setting the grid_resource submit description file command.

• The new job ClassAd attribute NumPids is the total number of child processes a running job has.

• The new configuration variable DAGMAN_MAX_JOB_HOLDS specifies the maximum number of times a DAG node job is allowed to go on hold. See section 3.3.26 for details.

• The configuration variable STARTD_SENDS_ALIVES now only needs to be set for the condor_schedd daemon. Also, the default value has changed to True.

• The job ClassAd attributes amazon_user_data and amazon_user_data_file can now both be used for the same job. When both are provided, the two blocks of data are concatenated, with the value of the one specified by amazon_user_data occurring first.

• The new configuration variable GRAM_VERSION_DETECTION can be used to disable Condor's attempts to distinguish between gt2 (GRAM2) and gt5 (GRAM5) servers. The default value is True. If set to False, Condor trusts the gt2 or gt5 value provided in the job's grid_resource attribute.

• The new job ClassAd attribute ResidentSetSize is an integer measuring the amount of physical memory in use by the job on the execute machine in kilobytes.

• The new job ClassAd attribute X509UserProxyExpiration is an integer representing when the job's X.509 proxy credential will expire, measured in the number of seconds since the epoch (00:00:00 UTC, Jan 1, 1970).

• The new configuration variable SCHEDD_CLUSTER_MAXIMUM_VALUE is an upper bound on assigned job cluster ids. If set to value , the maximum job cluster id assigned to any job will be . When the maximum id is reached, assignment of cluster ids will wrap around back to SCHEDD_CLUSTER_INITIAL_VALUE. The default value is zero, which does not set a maximum cluster id.

• The default value of configuration variable MAX_ACCEPTS_PER_CYCLE has been changed from 1 to 4.

• The configuration variable NEW_LOCKING , introduced in Condor version 7.5.2, has been changed to CREATE_LOCKS_ON_LOCAL_DISK and now defaults to True.

Bugs Fixed:

• Fixed a bug that occurred with x64 flavors of the Windows operating system. Condor was setting the default value of Arch to INTEL when it should have been X86_64. This was a consequence of the fact that the Condor runs in the WOW64 sandbox on 64-bit Windows. This was fixed so that Arch would contain the value for the native architecture rather than the WOW64 sandbox architecture.

• Fixed a bug in the user privilege switching code in Windows that caused the condor_shadow daemon to except when the condor_schedd daemon attempted to re-use it.

• Fixed the output in the condor_master daemon log file to be clearer when an authorized user tries to use condor_config_val -set and ENABLE_PERSISTENT_CONFIG is False. The previous output implied that the operation succeeded when, in fact, it did not.

• Since Condor version 7.5.2, the following condor_job_router features were effectively non-functional: UseSharedX509UserProxy, JobShouldBeSandboxed, and JobFailureTest.

• The submit description file command copy_to_spool did not work properly in Condor version 7.5.3. When sending the executable to the execute machine, it was transferred from the original path rather than from the spooled copy of the file.

• When output files were auto-selected and spooled, Condor-C and condor_transfer_data would copy back both the output files and all other contents of the job's spool directory, which typically included the spooled input and the user log. Now, only the output files are retrieved. To adjust which files are retrieved, the job attribute SpooledOutputFiles can be manipulated, but this typically should be managed by Condor.

• The condor_master daemon now invalidates its ClassAd, as represented in the condor_collector daemon, before it shuts down.

• Fixed a bug that caused vm universe jobs to not run if the VMware .vmx file contained a space.

• Fixed a bug introduced in Condor version 7.5.1 that caused integers in ClassAd expressions that had leading zeros to be read as octal (base eight).

• Fixed a bug introduced in Condor version 7.5.1 that did not recognize a semicolon as a separator of function arguments in ClassAds.

• Fixed a bug that caused integers larger than in a ClassAd expression to be parsed incorrectly. Now, when these integers are encountered, the largest 32-bit integer (with matching sign) is used.

• Fixed a bug that caused the condor_gridmanager to exit when receiving badly-formatted error messages from the nordugrid_gahp.

• Fixed a problem affecting the use of version 7.5.3 condor_startd and condor_master daemons in a pool with a condor_collector from before version 7.5.2. On shutdown, the condor_startd and the condor_master caused all condor_startd and condor_master ClassAds, respectively, to be removed from the condor_collector.

• Fixed a bug that caused delegation of an X.509 RFC proxy between two Condor processes to fail.

• Fixed a bug in condor_submit that would cause failures if a file name containing a space was used with the submit description file commands append_files, jar_files or vmware_dir.

• Fixed a bug that could cause the condor_gridmanager to lock up if a GAHP server it was using wrote a large amount of data to its stderr.

• Fixed a bug that could cause the condor_gridmanager to wrongly conclude that a gt2 (that is, GRAM2) server was a gt5 (that is, GRAM5) server. Such a conclusion can be disastrous, as Condor's mechanisms to prevent overloading a gt2 server are then disabled. The new configuration variable GRAM_VERSION_DETECTION can be used to disable Condor's attempts to distinguish between the two.

• Fixed a bug introduced in Condor version 7.5.3. When file transfer failed for a grid universe job of grid type cream, Condor would write a hold event to the job log, but not actually put the job on hold.

• Fixed a bug in the condor_gridmanager that could cause it to crash while handling cream grid type jobs destined for different resources.

• Fixed a bug that prevented the condor_shadow from managing additional jobs after its first job completed when SEC_ENABLE_MATCH_PASSWORD_AUTHENTICATION was set to True.

• The timestamps in the log defined by PROCD_LOG now print the real time.

• Fixed how some daemons advertise themselves to the condor_collector. Now, all daemons set the attribute MyType to indicate what type of daemon they are.

• condor_chirp no longer crashes on a put operation, if the remote file name is omitted.

• Fixed the packaging of Hadoop File System support in Condor. This includes updating to HDFS 0.20.2 and making the HDFS web interface work properly.

• Condor no longer tries to invoke glexec if the job's X.509 proxy is expired.

Known Bugs:

• Using host names for host-based authentication, such as in the definitions of configuration variables ALLOW_* and DENY_*, does not work on Mac OS X 10.4. Later versions of the OS are not affected. As a work around, IP addresses can be used instead of host names.

Additions and Changes to the Manual:

• None.

Version 7.5.3

Release Notes:

• Condor version 7.5.3 released on June 29, 2010.

New Features:

• condor_q -analyze now notices the -l option, and if both are given, then the analysis prints out the list of machines in each analysis category.

• The behavior of macro expansion in the configuration file has changed. Previously, most macros were effectively treated as undefined unless explicitly assigned a value in the configuration file. Only a small number of special macros had pre-defined values that could be referred to via macro expansion. Examples include FULL_HOSTNAME and DETECTED_MEMORY. Now, most configuration settings that have default values can be referred to via macro expansion. There are a small number of exceptions where the default value is too complex to represent in the current implementation of the configuration table. Examples include the security authorization settings. All such configuration settings will also be reported as undefined by condor_config_val unless they are explicitly set in the configuration file.

• Unauthenticated connections are now identified as unauthenticated@unmapped. Previously, unauthenticated connections were not assigned a name, so some authorization policies that needed to distinguish between authenticated and unauthenticated connections were not expressible. Connections that are authenticated but not mapped to a name by the mapfile used to be given the name auth-method@unmappeduser, where auth-method is the authentication method that was used. Such connections are now given the name auth-method@unmapped. Connections that match *@unmapped are now forbidden from doing operations that require a user id, regardless of configuration settings. Such operations include job submission, job removal, and any other job management commands that modify jobs.

• There has been a change of behavior when authentication fails. Previously, authentication failure always resulted in the command being rejected, regardless of whether the ALLOW/DENY settings permitted unauthenticated access or not. This is still true if either the client or server specifies that authentication is required. However, if both sides specify that authentication is not required (i.e. preferred or optional), then authentication failure only results in the command being rejected if the ALLOW/DENY settings reject unauthenticated access. This change makes it possible to have some commands accept unauthenticated users from some network addresses while only allowing authenticated users from others.

• Improved log messages when failing to authenticate requests. At least the IP address of the requester is identified in all cases.

• The new submit file command job_ad_information_attrs may be used to specify attributes from the job ad that should be saved in the user log whenever a new event is being written. See page  for details.

• Administrative commands now support the -constraint option, which accepts a ClassAd expression. This applies to condor_checkpoint, condor_off, condor_on, condor_reconfig, condor_reschedule, condor_restart, condor_set_shutdown, and condor_vacate.

• File transfer plugins can be used for vm universe jobs. Notably, file:// URLs can be used to allow VM image files to be pre-staged on the execute machine. The submit description file command vmware_dir is now optional. If it is not given, then all relevant VMware image files must be listed in transfer_input_files, possibly as URLs.

• File transfers for CREAM grid universe jobs are now initiated by the condor_gridmanager. This removes the need for a GridFTP server on the client machine.

• Improved the parallelism of file transfers for nordugrid jobs.

• Removed the distinction between regular and full reconfiguration of Condor daemons. Now, all reconfigurations are full and require the WRITE authorization level. condor_reconfig accepts but ignores the -full command-line option.

• The batch_gahp, used for pbs and lsf grid universe jobs, has been updated from version 1.12.2 to 1.16.0.

• condor_dagman now prints a message to the dagman.out file when it truncates a node job user log file.

• condor_dagman now allows node categories to include nodes from different splices. See section 2.10.7 for details.

• condor_dagman now allows category throttles in splices to be overridden by higher levels in the DAG splicing structure. See section 2.10.7 for details.

• Daemon logs can now be rotated several times instead of only once into a single .old file. In order to do so, the newly introduced configuration variable MAX_NUM_<SUBSYS>_LOG needs to be set to a value greater than 1. The file endings will be ISO timestamps, and the oldest rotated file will still have the ending .old.

Configuration Variable and ClassAd Attribute Additions and Changes:

• The new configuration variable JOB_ROUTER_LOCK specifies a lock file used to ensure that multiple instances of the condor_job_router never run with the same values of JOB_ROUTER_NAME. Multiple instances running with the same name could lead to mismanagement of routed jobs.

• The new configuration variable ROOSTER_MAX_UNHIBERNATE is an integer specifying the maximum number of machines to wake up per cycle. The default value of 0 means no limit.

• The new configuration variable ROOSTER_UNHIBERNATE_RANK is a ClassAd expression specifying which machines should be woken up first in a given cycle. Higher ranked machines are woken first. If the number of machines to be woken up is limited by ROOSTER_MAX_UNHIBERNATE, the rank may be used for determining which machines are woken before reaching the limit.

• The new configuration variable CLASSAD_USER_LIBS is a list of libraries containing additional ClassAd functions to be used during ClassAd evaluation.

• The new configuration variable SHADOW_WORKLIFE specifies the number of seconds after which the condor_shadow will exit, when the current job finishes, instead of fetching a new job to manage. Having the condor_shadow continue managing jobs helps reduce overhead and can allow the condor_schedd to achieve higher job completion rates. The default is 3600, one hour. The value 0 causes condor_shadow to exit after running a single job.

• The new configuration variable MAX_NUM_<SUBSYS>_LOG will determine how often the daemon log of SUBSYS will rotate. The default value is 1 which leads to the old behavior of a single rotation into a .old file.

Bugs Fixed:

• Configuration variables with a default value of 0 that were not defined in the configuration file were treated as though they were undefined by condor_config_val. Now Condor treats this case like any other: the default value is displayed.

• Starting in Condor version 7.5.1, using literals with a logical operator in a ClassAd expression (for example, 1 || 0) caused the expression to evaluate to the value ERROR. The previous behavior has been restored: zero values are treated as False, and non-zero values are treated as True.

• Starting in Condor version 7.5.0, the condor_schedd no longer supported queue management commands when security negotiation was disabled, for example, if SEC_DEFAULT_NEGOTIATION = NEVER.

• Fixed a bug introduced in Condor version 7.5.1. ClassAd string literals containing characters with negative ASCII values were not accepted.

• Fixed a bug introduced in Condor version 7.5.0, which caused Condor to not renew job leases for CREAM grid jobs in most situations.

• Question marks occurring in a ClassAd string are no longer preceded by a backslash when the ClassAd is printed.

Known Bugs:

• None.

Additions and Changes to the Manual:

• None.

Version 7.5.2

Release Notes:

• Condor version 7.5.2 released on April 26, 2010.

• Condor no longer supports SuSE 8 Linux on the Itanium 64 architecture.

• The following submit description file commands are no longer recognized. Their functionality is replaced by the command grid_resource.

  grid_type

  globusscheduler

  jobmanager_type

  remote_schedd

  remote_pool

  unicore_u_site

  unicore_v_site

New Features:

• The condor_schedd daemon uses less disk bandwidth when logging updates to job ClassAds from running jobs and also when removing jobs from the queue and handling job eviction and condor_shadow exceptions. This should improve performance in situations where disk bandwidth is a limiting factor. Some cases of updates to the job user log have also been optimized to be less disk intensive.

• The condor_schedd daemon uses less CPU when scheduling some types of job queues. Most likely to benefit from this improvement is a large queue of short-running, non-local, and non-scheduler universe jobs, with at least one idle local or scheduler universe job.

• The condor_schedd automatically grants the condor_startd authority to renew leases on claims and to evict claims. Previously, this required that the condor_startd be trusted for general DAEMON-level command access. Now this only requires READ-level command access. The specific commands that the condor_startd sends to the condor_schedd can effectively only operate on the claims associated with that condor_startd, so this change does not open up these operations to access by anyone with READ access. It reduces the level of trust that the condor_schedd must have in the condor_startd.

• The condor_procd's log now rotates if logging is activated. The default maximum size is 10Mbytes. To change the default, use the configuration variable MAX_PROCD_LOG .

• For Unix systems only, user job log and global job event log lock files can now optionally be created in a directory on a local drive by setting NEW_LOCKING to True. See section 3.3.4 for the details of this configuration variable.

• condor_dagman and condor_submit_dag now default to lazy creation of the .condor.sub files for nested DAGs. condor_submit_dag no longer creates them, and condor_dagman itself creates the files as the DAG is run. The previous "eager" behavior can be obtained with a combination of command-line and configuration settings. There are several advantages to the "lazy" submit file creation:
  • The DAG file for a nested DAG does not have to exist until that node is ready to run, so the DAG file can be dynamically created by earlier parts of the top-level DAG (including by the PRE script of the nested DAG node).
  • It is now possible to have nested DAGs within splices, which is not possible with "eager" submit file creation.

Configuration Variable and ClassAd Attribute Additions and Changes:

• The new configuration variable DAGMAN_GENERATE_SUBDAG_SUBMITS controls whether condor_dagman itself generates the .condor.sub files for nested DAGs, rather than relying on condor_submit_dag "eagerly" creating them. See section 3.3.26 for more information.

• The new configuration variable NEW_LOCKING can specify that job user logs and the global job event log to be written to a local drive, avoiding locking problems with NFS. See section 3.3.4 for the details of this configuration variable.

Bugs Fixed:

• The condor_job_router failed to work on SLES 9 PowerPC, AIX 5.2 PowerPC, and YDL 5 PowerPC due to a problem in how it detected EOF in the job queue log.

• When jobs are removed, the condor_schedd sometimes did not quickly reschedule a different job to run on the slot to which the removed job had been matched. Instead, it would take up to SCHEDD_INTERVAL seconds to do so.

• Fixed a bug introduced in Condor version 7.5.1 that caused the gahp_server to crash when first communicating with most gt2 or gt5 GRAM servers.

Known Bugs:

• None.

Additions and Changes to the Manual:

• None.

Version 7.5.1

Release Notes:

• Condor version 7.5.1 released on March 2, 2010.

• Some, but not all of the bug fixes and features which are in Condor version 7.4.2, are in this 7.5.1 release.

• The Condor release is now available as a proper RPM or Debian package.

• Condor now internally uses the version of New ClassAds provided as a stand-alone library (http://www.cs.wisc.edu/condor/classad/). Previously, Condor used an older version of ClassAds that was heavily tied to the Condor development libraries. This change should be transparent in the current development series. In the next development series (7.7.x), Condor will begin to use features of New ClassAds that were unavailable in Old ClassAds. Section 4.1.1 details the differences.

• HPUX 11.00 is no longer a supported platform.

New Features:

• A port number defined within CONDOR_VIEW_HOST may now use a shared port.

• The condor_master no longer pauses for 3 seconds after starting the condor_collector. However, if the configuration variable COLLECTOR_ADDRESS_FILE defines a file, the condor_master will wait for that file to be created before starting other daemons.

• In the grid universe, Condor can now automatically distinguish between GRAM2 and GRAM5 servers, that is grid types gt2 and gt5. Users can submit jobs using a grid type of gt2 or gt5 for either type of server.

• Grid universe jobs using the CREAM grid system now batch up common requests into larger single requests. This reduces network traffic, increases the number of parallel tasks the Condor can handle at once, and reduces the load on the remote gatekeeper.

• The new submit description file command cream_attributes sets additional attribute/value pairs for the CREAM job description that Condor creates when submitting a grid universe job destined for the CREAM grid system.

• The condor_q command with option -analyze is now performs the same analysis as previously occurred with the -better-analyze option. Therefore, the output of condor_q with the -analyze option has different output than before. The -better-analyze option is still recognized and behaves the same as before, though it may be removed from a future version.

• Security sessions that are not used for longer than an hour are now removed from the security session cache to limit memory usage.

• The number of security sessions in the cache is now advertised in the daemon ClassAd as MonitorSelfSecuritySessions.

• condor_dagman now has the capability to run DAGs containing nodes that are declared to be NOOPs - for these nodes, a job is never actually submitted. See section 2.10.2 for information.

• The submit file attribute vm_macaddr can now be used to set the MAC address for vm universe jobs that use VMware. The range of valid MAC addresses is constrained by limits imposed by VMware.

• The condor_q command with option -globus is now much more efficient in its communication with the condor_schedd.

Configuration Variable and ClassAd Attribute Additions and Changes:

• The new configuration variable STRICT_CLASSAD_EVALUATION controls whether new or old ClassAd expression evaluation semantics are used. In new ClassAd semantics, an unscoped attribute reference is only looked up in the local ad. The default is False (use old ClassAd semantics).

• The configuration variable DELEGATE_FULL_JOB_GSI_CREDENTIALS now applies to all proxy delegations done between Condor daemons and tools. The value is a boolean and defaults to False, which means that when doing delegation Condor will now create a limited proxy instead of a full proxy.

• The new configuration variable SEC_<access-level>_SESSION_LEASE specifies the maximum number of seconds an unused security session will be kept in a daemon's session cache before being removed to save memory. The default is 3600. If the server and client have different configurations, the smaller one will be used.

Bugs Fixed:

• The default value for SEC_DEFAULT_SESSION_DURATION was effectively 3600 in Condor version 7.5.0. This produced longer than desired cached sessions for short-lived tools such as condor_status. It also produced shorter than possibly desired cached sessions for long-lived daemons such as condor_startd. The default has been restored to what it was before Condor version 7.5.0, with the exception of condor_submit, which has been changed from 1 hour to 60 seconds. For command line tools, the default is 60 seconds, and for daemons it is 1 day.

• SEC_<access-level>_SESSION_DURATION previously did not support integer expressions, but it did not detect invalid input, so the use of an expression could produce unexpected results. Now, like other integer configuration variables, a constant expression can be used and input is fully validated.

• The configuration variable LOCAL_CONFIG_DIR is no longer ignored if defined in a local configuration file.

• Removed the incorrect issuing of the following Condor version 7.5.0 warning to the condor_starter's log, even when the outdated, and no longer used configuration variable EXECUTE_LOGIN_IS_DEDICATED was not defined.

  WARNING: EXECUTE_LOGIN_IS_DEDICATED is deprecated.
  Please use DEDICATED_EXECUTE_ACCOUNT_REGEXP instead.
  

Known Bugs:

• None.

Additions and Changes to the Manual:

• None.

Version 7.5.0

Release Notes:

• All bug fixes and features which are in 7.4.1 are in this 7.5.0 release.

New Features:

• Added the new daemon condor_shared_port for Unix platforms (except for HPUX). It allows Condor daemons to share a single network port. This makes opening access to Condor through a firewall easier and safer. It also increases the scalability of a submit node by decreasing port usage. See section 3.3.36 for more information.

• Improved CCB's handling of rude NAT/firewalls that silently drop TCP connections.

• Simplified the publication of daemon addresses. PublicNetworkIpAddr and PrivateNetworkIpAddr have been removed. MyAddress contains both public and private addresses. For now, <Subsys>IpAddr contains the same information. In a future release, the latter may be removed.

• Changes to TCP_FORWARDING_HOST, PRIVATE_NETWORK_ADDRESS, and PRIVATE_NETWORK_NAME can now be made without requiring a full restart. It may take up to one condor_collector update interval for the changes to become visible.

• Network compatibility with Condor prior to 6.3.3 is no longer supported unless SEC_CLIENT_NEGOTIATION is set to NEVER. This change removes the risk of communication errors causing performance problems resulting from automatic fall-back to the old protocol.

• For efficiency, authentication between the condor_shadow and condor_schedd daemons is now able to be cached and reused in more cases. Previously, authentication for updating job information was only cached if read access was configured to require authentication.

• condor_config_val will now report the default value for configuration variables that are not set in the configuration files.

• The condor_gridmanager now uses a single status call to obtain the status of all CREAM grid universe jobs from the remote server.

• The condor_gridmanager will now retry CREAM commands that time out.

• Forwarding a renewed proxy for CREAM grid universe jobs to the remote server is now much more efficient.

Configuration Variable and ClassAd Attribute Additions and Changes:

• Removed the configuration variable COLLECTOR_SOCKET_CACHE_SIZE. Configuration of this parameter used to be mandatory to enable TCP updates to the condor_collector. Now no special configuration of the condor_collector is required to allow TCP updates, but it is important to ensure that there are sufficient file descriptors for efficient operation. See section 3.7.6 for more information.

• The new configuration variable USE_SHARED_PORT is a boolean value that specifies whether a Condor process should rely on the condor_shared_port daemon for receiving incoming connections. Write access to DAEMON_SOCKET_DIR is required for this to take effect. The default is False. If set to True, SHARED_PORT should be added to DAEMON_LIST. See section 3.3.36 for more information.

• Added the new configuration variable CCB_HEARTBEAT_INTERVAL. It is the maximum number of seconds of silence on a daemon's connection to the CCB server after which it will ping the server to verify that the connection still works. The default value is 1200 (20 minutes). This feature serves to both speed up detection of dead connections and to generate a guaranteed minimum frequency of activity to attempt to prevent the connection from being dropped.

Bugs Fixed:

• Fixed problem with a ClassAd debug function, so it now properly emits debug information for ClassAd IfThenElse clauses.

Known Bugs:

• None.

Additions and Changes to the Manual:

• None.