ide_atareg.h File Reference

#include <machine/endian.h>

Go to the source code of this file.

Classes
struct	ataparams

Macros
#define	WDC_CFG_ATAPI_MASK   0xc000
#define	WDC_CFG_ATAPI   0x8000
#define	ATA_CFG_REMOVABLE   0x0080
#define	ATA_CFG_FIXED   0x0040
#define	ATAPI_CFG_TYPE_MASK   0x1f00
#define	ATAPI_CFG_TYPE(x)   (((x) & ATAPI_CFG_TYPE_MASK) >> 8)
#define	ATAPI_CFG_TYPE_DIRECT   0x00
#define	ATAPI_CFG_TYPE_SEQUENTIAL   0x01
#define	ATAPI_CFG_TYPE_CDROM   0x05
#define	ATAPI_CFG_TYPE_OPTICAL   0x07
#define	ATAPI_CFG_TYPE_NODEVICE   0x1F
#define	ATAPI_CFG_REMOV   0x0080
#define	ATAPI_CFG_DRQ_MASK   0x0060
#define	ATAPI_CFG_STD_DRQ   0x0000
#define	ATAPI_CFG_IRQ_DRQ   0x0020
#define	ATAPI_CFG_ACCEL_DRQ   0x0040
#define	ATAPI_CFG_CMD_MASK   0x0003
#define	ATAPI_CFG_CMD_12   0x0000
#define	ATAPI_CFG_CMD_16   0x0001
#define	WDC_CAP_IORDY   0x0800
#define	WDC_CAP_IORDY_DSBL   0x0400
#define	WDC_CAP_LBA   0x0200
#define	WDC_CAP_DMA   0x0100
#define	ATA_CAP_STBY   0x2000
#define	ATAPI_CAP_INTERL_DMA   0x8000
#define	ATAPI_CAP_CMD_QUEUE   0x4000
#define	ATAPI_CAP_OVERLP   0x2000
#define	ATAPI_CAP_ATA_RST   0x1000
#define	WDC_EXT_UDMA_MODES   0x0004
#define	WDC_EXT_MODES   0x0002
#define	WDC_EXT_GEOM   0x0001
#define	WDC_MULTI_VALID   0x0100
#define	WDC_MULTI_MASK   0x00ff
#define	WDC_QUEUE_DEPTH_MASK   0x1f
#define	SATA_SIGNAL_GEN1   0x0002 /* SATA Gen-1 signaling speed */
#define	SATA_SIGNAL_GEN2   0x0004 /* SATA Gen-2 signaling speed */
#define	SATA_NATIVE_CMDQ   0x0100 /* native command queuing */
#define	SATA_HOST_PWR_MGMT   0x0200 /* power management (host) */
#define	SATA_NONZERO_OFFSETS   0x0002 /* non-zero buffer offsets */
#define	SATA_DMA_SETUP_AUTO   0x0004 /* DMA setup auto-activate */
#define	SATA_DRIVE_PWR_MGMT   0x0008 /* power management (device) */
#define	WDC_VER_ATA1   0x0002
#define	WDC_VER_ATA2   0x0004
#define	WDC_VER_ATA3   0x0008
#define	WDC_VER_ATA4   0x0010
#define	WDC_VER_ATA5   0x0020
#define	WDC_VER_ATA6   0x0040
#define	WDC_VER_ATA7   0x0080
#define	WDC_VER_ATA8   0x0100
#define	WDC_VER_ATA9   0x0200
#define	WDC_VER_ATA10   0x0400
#define	WDC_VER_ATA11   0x0800
#define	WDC_VER_ATA12   0x1000
#define	WDC_VER_ATA13   0x2000
#define	WDC_VER_ATA14   0x4000
#define	WDC_CMD1_NOP   0x4000
#define	WDC_CMD1_RB   0x2000
#define	WDC_CMD1_WB   0x1000
#define	WDC_CMD1_HPA   0x0400
#define	WDC_CMD1_DVRST   0x0200
#define	WDC_CMD1_SRV   0x0100
#define	WDC_CMD1_RLSE   0x0080
#define	WDC_CMD1_AHEAD   0x0040
#define	WDC_CMD1_CACHE   0x0020
#define	WDC_CMD1_PKT   0x0010
#define	WDC_CMD1_PM   0x0008
#define	WDC_CMD1_REMOV   0x0004
#define	WDC_CMD1_SEC   0x0002
#define	WDC_CMD1_SMART   0x0001
#define	ATAPI_CMD2_FCE   0x2000 /* Flush Cache Ext supported */
#define	ATAPI_CMD2_FC   0x1000 /* Flush Cache supported */
#define	ATAPI_CMD2_DCO   0x0800 /* Device Configuration Overlay supported */
#define	ATAPI_CMD2_48AD   0x0400 /* 48bit address supported */
#define	ATAPI_CMD2_AAM   0x0200 /* Automatic Acoustic Management supported */
#define	ATAPI_CMD2_SM   0x0100 /* Set Max security extension supported */
#define	ATAPI_CMD2_SF   0x0040 /* Set Features subcommand required */
#define	ATAPI_CMD2_PUIS   0x0020 /* Power up in standby supported */
#define	WDC_CMD2_RMSN   0x0010
#define	ATA_CMD2_APM   0x0008
#define	ATA_CMD2_CFA   0x0004
#define	ATA_CMD2_RWQ   0x0002
#define	WDC_CMD2_DM   0x0001 /* Download Microcode supported */
#define	ATAPI_CMDE_MSER   0x0004 /* Media serial number supported */
#define	ATAPI_CMDE_TEST   0x0002 /* SMART self-test supported */
#define	ATAPI_CMDE_SLOG   0x0001 /* SMART error logging supported */
#define	ATA_HWRES_CBLID   0x2000 /* CBLID above Vih */
#define	ATA_HWRES_D1_PDIAG   0x0800 /* Device 1 PDIAG detect OK */
#define	ATA_HWRES_D1_CSEL   0x0400 /* Device 1 used CSEL for address */
#define	ATA_HWRES_D1_JUMP   0x0200 /* Device 1 jumpered to address */
#define	ATA_HWRES_D0_SEL   0x0040 /* Device 0 responds when Dev 1 selected */
#define	ATA_HWRES_D0_DASP   0x0020 /* Device 0 DASP detect OK */
#define	ATA_HWRES_D0_PDIAG   0x0010 /* Device 0 PDIAG detect OK */
#define	ATA_HWRES_D0_DIAG   0x0008 /* Device 0 diag OK */
#define	ATA_HWRES_D0_CSEL   0x0004 /* Device 0 used CSEL for address */
#define	ATA_HWRES_D0_JUMP   0x0002 /* Device 0 jumpered to address */
#define	WDC_RMSN_SUPP_MASK   0x0003
#define	WDC_RMSN_SUPP   0x0001
#define	WDC_SEC_LEV_MAX   0x0100
#define	WDC_SEC_ESE_SUPP   0x0020
#define	WDC_SEC_EXP   0x0010
#define	WDC_SEC_FROZEN   0x0008
#define	WDC_SEC_LOCKED   0x0004
#define	WDC_SEC_EN   0x0002
#define	WDC_SEC_SUPP   0x0001
#define	ATAPI_CFA_MAX_MASK   0x0FFF
#define	ATAPI_CFA_MODE1_DIS   0x1000 /* CFA Mode 1 Disabled */
#define	ATAPI_CFA_MODE1_REQ   0x2000 /* CFA Mode 1 Required */
#define	ATAPI_CFA_WORD160   0x8000 /* Word 160 supported */

Macro Definition Documentation

#define ATA_CAP_STBY   0x2000

Definition at line 110 of file ide_atareg.h.

#define ATA_CFG_FIXED   0x0040

Definition at line 73 of file ide_atareg.h.

#define ATA_CFG_REMOVABLE   0x0080

Definition at line 72 of file ide_atareg.h.

#define ATA_CMD2_APM   0x0008

Definition at line 216 of file ide_atareg.h.

#define ATA_CMD2_CFA   0x0004

Definition at line 217 of file ide_atareg.h.

#define ATA_CMD2_RWQ   0x0002

Definition at line 218 of file ide_atareg.h.

#define ATA_HWRES_CBLID   0x2000 /* CBLID above Vih */

Definition at line 243 of file ide_atareg.h.

#define ATA_HWRES_D0_CSEL   0x0004 /* Device 0 used CSEL for address */

Definition at line 251 of file ide_atareg.h.

#define ATA_HWRES_D0_DASP   0x0020 /* Device 0 DASP detect OK */

Definition at line 248 of file ide_atareg.h.

#define ATA_HWRES_D0_DIAG   0x0008 /* Device 0 diag OK */

Definition at line 250 of file ide_atareg.h.

#define ATA_HWRES_D0_JUMP   0x0002 /* Device 0 jumpered to address */

Definition at line 252 of file ide_atareg.h.

#define ATA_HWRES_D0_PDIAG   0x0010 /* Device 0 PDIAG detect OK */

Definition at line 249 of file ide_atareg.h.

#define ATA_HWRES_D0_SEL   0x0040 /* Device 0 responds when Dev 1 selected */

Definition at line 247 of file ide_atareg.h.

#define ATA_HWRES_D1_CSEL   0x0400 /* Device 1 used CSEL for address */

Definition at line 245 of file ide_atareg.h.

#define ATA_HWRES_D1_JUMP   0x0200 /* Device 1 jumpered to address */

Definition at line 246 of file ide_atareg.h.

#define ATA_HWRES_D1_PDIAG   0x0800 /* Device 1 PDIAG detect OK */

Definition at line 244 of file ide_atareg.h.

#define ATAPI_CAP_ATA_RST   0x1000

Definition at line 114 of file ide_atareg.h.

#define ATAPI_CAP_CMD_QUEUE   0x4000

Definition at line 112 of file ide_atareg.h.

#define ATAPI_CAP_INTERL_DMA   0x8000

Definition at line 111 of file ide_atareg.h.

#define ATAPI_CAP_OVERLP   0x2000

Definition at line 113 of file ide_atareg.h.

#define ATAPI_CFA_MAX_MASK   0x0FFF

Definition at line 276 of file ide_atareg.h.

#define ATAPI_CFA_MODE1_DIS   0x1000 /* CFA Mode 1 Disabled */

Definition at line 277 of file ide_atareg.h.

#define ATAPI_CFA_MODE1_REQ   0x2000 /* CFA Mode 1 Required */

Definition at line 278 of file ide_atareg.h.

#define ATAPI_CFA_WORD160   0x8000 /* Word 160 supported */

Definition at line 279 of file ide_atareg.h.

#define ATAPI_CFG_ACCEL_DRQ   0x0040

Definition at line 85 of file ide_atareg.h.

#define ATAPI_CFG_CMD_12   0x0000

Definition at line 87 of file ide_atareg.h.

#define ATAPI_CFG_CMD_16   0x0001

Definition at line 88 of file ide_atareg.h.

#define ATAPI_CFG_CMD_MASK   0x0003

Definition at line 86 of file ide_atareg.h.

#define ATAPI_CFG_DRQ_MASK   0x0060

Definition at line 82 of file ide_atareg.h.

#define ATAPI_CFG_IRQ_DRQ   0x0020

Definition at line 84 of file ide_atareg.h.

#define ATAPI_CFG_REMOV   0x0080

Definition at line 81 of file ide_atareg.h.

#define ATAPI_CFG_STD_DRQ   0x0000

Definition at line 83 of file ide_atareg.h.

#define ATAPI_CFG_TYPE

(

x

)

(((x) & ATAPI_CFG_TYPE_MASK) >> 8)

Definition at line 75 of file ide_atareg.h.

#define ATAPI_CFG_TYPE_CDROM   0x05

Definition at line 78 of file ide_atareg.h.

#define ATAPI_CFG_TYPE_DIRECT   0x00

Definition at line 76 of file ide_atareg.h.

#define ATAPI_CFG_TYPE_MASK   0x1f00

Definition at line 74 of file ide_atareg.h.

#define ATAPI_CFG_TYPE_NODEVICE   0x1F

Definition at line 80 of file ide_atareg.h.

#define ATAPI_CFG_TYPE_OPTICAL   0x07

Definition at line 79 of file ide_atareg.h.

#define ATAPI_CFG_TYPE_SEQUENTIAL   0x01

Definition at line 77 of file ide_atareg.h.

#define ATAPI_CMD2_48AD   0x0400 /* 48bit address supported */

Definition at line 210 of file ide_atareg.h.

#define ATAPI_CMD2_AAM   0x0200 /* Automatic Acoustic Management supported */

Definition at line 211 of file ide_atareg.h.

#define ATAPI_CMD2_DCO   0x0800 /* Device Configuration Overlay supported */

Definition at line 209 of file ide_atareg.h.

#define ATAPI_CMD2_FC   0x1000 /* Flush Cache supported */

Definition at line 208 of file ide_atareg.h.

#define ATAPI_CMD2_FCE   0x2000 /* Flush Cache Ext supported */

Definition at line 207 of file ide_atareg.h.

#define ATAPI_CMD2_PUIS   0x0020 /* Power up in standby supported */

Definition at line 214 of file ide_atareg.h.

#define ATAPI_CMD2_SF   0x0040 /* Set Features subcommand required */

Definition at line 213 of file ide_atareg.h.

#define ATAPI_CMD2_SM   0x0100 /* Set Max security extension supported */

Definition at line 212 of file ide_atareg.h.

#define ATAPI_CMDE_MSER   0x0004 /* Media serial number supported */

Definition at line 221 of file ide_atareg.h.

#define ATAPI_CMDE_SLOG   0x0001 /* SMART error logging supported */

Definition at line 223 of file ide_atareg.h.

#define ATAPI_CMDE_TEST   0x0002 /* SMART self-test supported */

Definition at line 222 of file ide_atareg.h.

#define SATA_DMA_SETUP_AUTO   0x0004 /* DMA setup auto-activate */

Definition at line 172 of file ide_atareg.h.

#define SATA_DRIVE_PWR_MGMT   0x0008 /* power management (device) */

Definition at line 173 of file ide_atareg.h.

#define SATA_HOST_PWR_MGMT   0x0200 /* power management (host) */

Definition at line 168 of file ide_atareg.h.

#define SATA_NATIVE_CMDQ   0x0100 /* native command queuing */

Definition at line 167 of file ide_atareg.h.

#define SATA_NONZERO_OFFSETS   0x0002 /* non-zero buffer offsets */

Definition at line 171 of file ide_atareg.h.

#define SATA_SIGNAL_GEN1   0x0002 /* SATA Gen-1 signaling speed */

Definition at line 165 of file ide_atareg.h.

#define SATA_SIGNAL_GEN2   0x0004 /* SATA Gen-2 signaling speed */

Definition at line 166 of file ide_atareg.h.

#define WDC_CAP_DMA   0x0100

Definition at line 109 of file ide_atareg.h.

#define WDC_CAP_IORDY   0x0800

Definition at line 106 of file ide_atareg.h.

#define WDC_CAP_IORDY_DSBL   0x0400

Definition at line 107 of file ide_atareg.h.

#define WDC_CAP_LBA   0x0200

Definition at line 108 of file ide_atareg.h.

#define WDC_CFG_ATAPI   0x8000

Definition at line 71 of file ide_atareg.h.

#define WDC_CFG_ATAPI_MASK   0xc000

Definition at line 70 of file ide_atareg.h.

#define WDC_CMD1_AHEAD   0x0040

Definition at line 199 of file ide_atareg.h.

#define WDC_CMD1_CACHE   0x0020

Definition at line 200 of file ide_atareg.h.

#define WDC_CMD1_DVRST   0x0200

Definition at line 196 of file ide_atareg.h.

#define WDC_CMD1_HPA   0x0400

Definition at line 195 of file ide_atareg.h.

#define WDC_CMD1_NOP   0x4000

Definition at line 192 of file ide_atareg.h.

#define WDC_CMD1_PKT   0x0010

Definition at line 201 of file ide_atareg.h.

#define WDC_CMD1_PM   0x0008

Definition at line 202 of file ide_atareg.h.

#define WDC_CMD1_RB   0x2000

Definition at line 193 of file ide_atareg.h.

#define WDC_CMD1_REMOV   0x0004

Definition at line 203 of file ide_atareg.h.

#define WDC_CMD1_RLSE   0x0080

Definition at line 198 of file ide_atareg.h.

#define WDC_CMD1_SEC   0x0002

Definition at line 204 of file ide_atareg.h.

#define WDC_CMD1_SMART   0x0001

Definition at line 205 of file ide_atareg.h.

#define WDC_CMD1_SRV   0x0100

Definition at line 197 of file ide_atareg.h.

#define WDC_CMD1_WB   0x1000

Definition at line 194 of file ide_atareg.h.

#define WDC_CMD2_DM   0x0001 /* Download Microcode supported */

Definition at line 219 of file ide_atareg.h.

#define WDC_CMD2_RMSN   0x0010

Definition at line 215 of file ide_atareg.h.

#define WDC_EXT_GEOM   0x0001

Definition at line 130 of file ide_atareg.h.

#define WDC_EXT_MODES   0x0002

Definition at line 129 of file ide_atareg.h.

#define WDC_EXT_UDMA_MODES   0x0004

Definition at line 128 of file ide_atareg.h.

#define WDC_MULTI_MASK   0x00ff

Definition at line 139 of file ide_atareg.h.

#define WDC_MULTI_VALID   0x0100

Definition at line 138 of file ide_atareg.h.

#define WDC_QUEUE_DEPTH_MASK   0x1f

Definition at line 163 of file ide_atareg.h.

#define WDC_RMSN_SUPP   0x0001

Definition at line 265 of file ide_atareg.h.

#define WDC_RMSN_SUPP_MASK   0x0003

Definition at line 264 of file ide_atareg.h.

#define WDC_SEC_EN   0x0002

Definition at line 272 of file ide_atareg.h.

#define WDC_SEC_ESE_SUPP   0x0020

Definition at line 268 of file ide_atareg.h.

#define WDC_SEC_EXP   0x0010

Definition at line 269 of file ide_atareg.h.

#define WDC_SEC_FROZEN   0x0008

Definition at line 270 of file ide_atareg.h.

#define WDC_SEC_LEV_MAX   0x0100

Definition at line 267 of file ide_atareg.h.

#define WDC_SEC_LOCKED   0x0004

Definition at line 271 of file ide_atareg.h.

#define WDC_SEC_SUPP   0x0001

Definition at line 273 of file ide_atareg.h.

#define WDC_VER_ATA1   0x0002

Definition at line 176 of file ide_atareg.h.

#define WDC_VER_ATA10   0x0400

Definition at line 185 of file ide_atareg.h.

#define WDC_VER_ATA11   0x0800

Definition at line 186 of file ide_atareg.h.

#define WDC_VER_ATA12   0x1000

Definition at line 187 of file ide_atareg.h.

#define WDC_VER_ATA13   0x2000

Definition at line 188 of file ide_atareg.h.

#define WDC_VER_ATA14   0x4000

Definition at line 189 of file ide_atareg.h.

#define WDC_VER_ATA2   0x0004

Definition at line 177 of file ide_atareg.h.

#define WDC_VER_ATA3   0x0008

Definition at line 178 of file ide_atareg.h.

#define WDC_VER_ATA4   0x0010

Definition at line 179 of file ide_atareg.h.

#define WDC_VER_ATA5   0x0020

Definition at line 180 of file ide_atareg.h.

#define WDC_VER_ATA6   0x0040

Definition at line 181 of file ide_atareg.h.

#define WDC_VER_ATA7   0x0080

Definition at line 182 of file ide_atareg.h.

Referenced by IdeDisk::IdeDisk().

#define WDC_VER_ATA8   0x0100

Definition at line 183 of file ide_atareg.h.

#define WDC_VER_ATA9   0x0200

Definition at line 184 of file ide_atareg.h.