gem5
|
Port on the side that forwards requests and receives responses. More...
#include <serial_link.hh>
Public Member Functions | |
SerialLinkMasterPort (const std::string &_name, SerialLink &_serial_link, SerialLinkSlavePort &_slavePort, Cycles _delay, int _req_limit) | |
Constructor for the SerialLinkMasterPort. More... | |
bool | reqQueueFull () const |
Is this side blocked from accepting new request packets. More... | |
void | schedTimingReq (PacketPtr pkt, Tick when) |
Queue a request packet to be sent out later and also schedule a send if necessary. More... | |
bool | checkFunctional (PacketPtr pkt) |
Check a functional request against the packets in our request queue. More... | |
Public Member Functions inherited from MasterPort | |
MasterPort (const std::string &name, MemObject *owner, PortID id=InvalidPortID) | |
Master port. More... | |
virtual | ~MasterPort () |
void | bind (BaseSlavePort &slave_port) |
Bind this master port to a slave port. More... | |
void | unbind () |
Unbind this master port and the associated slave port. More... | |
Tick | sendAtomic (PacketPtr pkt) |
Send an atomic request packet, where the data is moved and the state is updated in zero time, without interleaving with other memory accesses. More... | |
void | sendFunctional (PacketPtr pkt) |
Send a functional request packet, where the data is instantly updated everywhere in the memory system, without affecting the current state of any block or moving the block. More... | |
bool | sendTimingReq (PacketPtr pkt) |
Attempt to send a timing request to the slave port by calling its corresponding receive function. More... | |
bool | sendTimingSnoopResp (PacketPtr pkt) |
Attempt to send a timing snoop response packet to the slave port by calling its corresponding receive function. More... | |
virtual void | sendRetryResp () |
Send a retry to the slave port that previously attempted a sendTimingResp to this master port and failed. More... | |
virtual bool | isSnooping () const |
Determine if this master port is snooping or not. More... | |
AddrRangeList | getAddrRanges () const |
Get the address ranges of the connected slave port. More... | |
void | printAddr (Addr a) |
Inject a PrintReq for the given address to print the state of that address throughout the memory system. More... | |
Public Member Functions inherited from BaseMasterPort | |
BaseSlavePort & | getSlavePort () const |
bool | isConnected () const |
Public Member Functions inherited from Port | |
const std::string | name () const |
Return port name (for DPRINTF). More... | |
PortID | getId () const |
Get the port id. More... | |
Protected Member Functions | |
bool | recvTimingResp (PacketPtr pkt) |
When receiving a timing request from the peer port, pass it to the serial_link. More... | |
void | recvReqRetry () |
When receiving a retry request from the peer port, pass it to the serial_link. More... | |
Protected Member Functions inherited from MasterPort | |
virtual Tick | recvAtomicSnoop (PacketPtr pkt) |
Receive an atomic snoop request packet from the slave port. More... | |
virtual void | recvFunctionalSnoop (PacketPtr pkt) |
Receive a functional snoop request packet from the slave port. More... | |
virtual void | recvTimingSnoopReq (PacketPtr pkt) |
Receive a timing snoop request from the slave port. More... | |
virtual void | recvRetrySnoopResp () |
Called by the slave port if sendTimingSnoopResp was called on this master port (causing recvTimingSnoopResp to be called on the slave port) and was unsuccesful. More... | |
virtual void | recvRangeChange () |
Called to receive an address range change from the peer slave port. More... | |
Protected Member Functions inherited from BaseMasterPort | |
BaseMasterPort (const std::string &name, MemObject *owner, PortID id=InvalidPortID) | |
virtual | ~BaseMasterPort () |
Protected Member Functions inherited from Port | |
Port (const std::string &_name, MemObject &_owner, PortID _id) | |
Abstract base class for ports. More... | |
virtual | ~Port () |
Virtual destructor due to inheritance. More... | |
Private Member Functions | |
void | trySendTiming () |
Handle send event, scheduled when the packet at the head of the outbound queue is ready to transmit (for timing accesses only). More... | |
Private Attributes | |
SerialLink & | serial_link |
The serial_link to which this port belongs. More... | |
SerialLinkSlavePort & | slavePort |
The slave port on the other side of the serial_link. More... | |
const Cycles | delay |
Minimum delay though this serial_link. More... | |
std::deque< DeferredPacket > | transmitList |
Request packet queue. More... | |
const unsigned int | reqQueueLimit |
Max queue size for request packets. More... | |
EventWrapper < SerialLinkMasterPort,&SerialLinkMasterPort::trySendTiming > | sendEvent |
Send event for the request queue. More... | |
Additional Inherited Members | |
Protected Attributes inherited from BaseMasterPort | |
BaseSlavePort * | _baseSlavePort |
Protected Attributes inherited from Port | |
const PortID | id |
A numeric identifier to distinguish ports in a vector, and set to InvalidPortID in case this port is not part of a vector. More... | |
MemObject & | owner |
A reference to the MemObject that owns this port. More... | |
Port on the side that forwards requests and receives responses.
The master port has a buffer for the requests not yet sent.
Definition at line 215 of file serial_link.hh.
SerialLink::SerialLinkMasterPort::SerialLinkMasterPort | ( | const std::string & | _name, |
SerialLink & | _serial_link, | ||
SerialLinkSlavePort & | _slavePort, | ||
Cycles | _delay, | ||
int | _req_limit | ||
) |
Constructor for the SerialLinkMasterPort.
_name | the port name including the owner |
_serial_link | the structural owner |
_slavePort | the slave port on the other side of the serial_link |
_delay | the delay in cycles from receiving to sending |
_req_limit | the size of the request queue |
Definition at line 73 of file serial_link.cc.
bool SerialLink::SerialLinkMasterPort::checkFunctional | ( | PacketPtr | pkt | ) |
Check a functional request against the packets in our request queue.
pkt | packet to check against |
Definition at line 413 of file serial_link.cc.
References Packet::checkFunctional(), ArmISA::i, and Packet::makeResponse().
Referenced by SerialLink::SerialLinkSlavePort::recvFunctional().
|
protectedvirtual |
When receiving a retry request from the peer port, pass it to the serial_link.
Implements MasterPort.
Definition at line 371 of file serial_link.cc.
|
protectedvirtual |
When receiving a timing request from the peer port, pass it to the serial_link.
Implements MasterPort.
Definition at line 139 of file serial_link.cc.
References Packet::cmdString(), divCeil(), DPRINTF, Packet::getAddr(), Packet::getSize(), Packet::headerDelay, Packet::payloadDelay, SerialLink::SerialLinkSlavePort::schedTimingResp(), SerialLink::slavePort, and ArmISA::t.
bool SerialLink::SerialLinkMasterPort::reqQueueFull | ( | ) | const |
Is this side blocked from accepting new request packets.
Definition at line 133 of file serial_link.cc.
Referenced by SerialLink::SerialLinkSlavePort::recvTimingReq(), and SerialLink::SerialLinkSlavePort::trySendTiming().
Queue a request packet to be sent out later and also schedule a send if necessary.
pkt | a request to send out after a delay |
when | tick when response packet should be sent |
Definition at line 249 of file serial_link.cc.
Referenced by SerialLink::SerialLinkSlavePort::recvTimingReq().
|
private |
Handle send event, scheduled when the packet at the head of the outbound queue is ready to transmit (for timing accesses only).
Definition at line 280 of file serial_link.cc.
References curTick(), divCeil(), DPRINTF, Packet::getAddr(), Packet::getSize(), SerialLink::SerialLinkSlavePort::retryStalledReq(), SerialLink::slavePort, ArmISA::t, and SerialLink::DeferredPacket::tick.
|
private |
Minimum delay though this serial_link.
Definition at line 229 of file serial_link.hh.
|
private |
Max queue size for request packets.
Definition at line 240 of file serial_link.hh.
|
private |
Send event for the request queue.
Definition at line 251 of file serial_link.hh.
|
private |
The serial_link to which this port belongs.
Definition at line 221 of file serial_link.hh.
|
private |
The slave port on the other side of the serial_link.
Definition at line 226 of file serial_link.hh.
|
private |
Request packet queue.
Request packets are held in this queue for a specified delay to model the processing delay of the serial_link. We use a deque as we need to iterate over the items for functional accesses.
Definition at line 237 of file serial_link.hh.